3B Public Hearing 2007 0402 - Laserfiche WebLink

Home

adjacent public streets; Hydro-seed or apply non-toxic soil stabilizers to inactive construction areas [previously graded areas inactive for ten (10) days or more]; enclose, cover, water twice daily or apply non-toxic soil stabilizers to exposed stockpiles (dirt, sand, etc.); limit traffic speeds on unpaved roads to fifteen (15) miles per hour; install sandbags or other erosion control measures to prevent silt runoff to public roadways; replant vegetation in disturbed areas as quickly as possible; and designate a person or persons to oversee the implementation of a comprehensive dust control program and to increase watering, if necessary. M. Prior to issuance of demolition or grading permits, the Applicant shall consult with the Army Corps of Engineers and the California Department of Fish and Game (and any other agencies deemed responsible agencies) for development of sedimentation plans and runoff controls that will not adversely impact the established on-site wetlands mitigation area, either during the construction phase or upon proj ect build-out. Proof of the agencies approval shall be submitted to the Community Development Director prior to issuance of a demolition or grading permit. . N. Prior to issuance of a grading permit, the Applicant shall confer with the Army Corps of Engineers for determination of whether the small wetlands area proposed to be removed (less than 1/10 of an acre) are considered jurisdictional and whether removal of them will require replacement (and at what ratio). This shall be accomplished to the satisfaction of the Army Corps of Engineers and the California Department of Fish and Game. If a replacement plan is required, the plan shall be developed in conjunction with the Army Corps of Engineers afld the California Department of Fish Game and submitted to the Community Development Director prior to issuance of grading permits. O. Prior to issuance of demolition permits, the Applicant shall have a survey completed that analyzes the extent of on-site paints, varnishes, oil, and other potentially toxic materials, and including electrical circuit breakers and transformers, as well as asbestos and lead paint. A plan for proper disposal of surveyed materials shall be submitted to the Regional Water Quality Control Board, Bay Area Air Quality Management District, and the City's Environmental Services Manager for review and approval prior to issuance of demolition permits. P. All asbestos-containing materials shall be required to be abated by the Applicant prior to demolition. Non-friable materials observed can be disposed of as non- hazardous waste. Worker protection, dust controls, packaging in a sealed dumpster or closed truck, and asbestos registration of the demolition contractor shall be required in compliance with CallOSHA regulation 8 CCR 1529 and the California Business Code. Friable asbestos shall be removed under full isolation abatement procedures. All thermal system insulation is classified as friable asbestos and shall be removed under Work Class I procedures in compliance with 8 CCR 1529. All asbestos removal operations shall be conducted with the oversight and approval of the Bay Area Air Quality Management District. Revised Reconunended Conditions of Approval PLN2002-00031 Bayside Business Park November 4, 2002 Page 6