Ord 2007-023 - Laserfiche WebLink

Home

105.6.23 Hot work operations. An operational permit is required for hot work including, but not limited to: 1. Public exhibitions and demonstrations where hot work is conducted. 2. Use of portable hot work equipment inside a structure. a. Exception: Work that is conducted under a construction permit. 3. Fixed-site hot work equipment such as welding booths. 4. Hot work conducted within a hazardous fire area. 5. Application of roof coverings with the use of an open-flame device. 6. When approved, the fire code official shall issue a permit to carry out a Hot Work Program. This program allows approved personnel to regulate their facility's hot work operations. The approved personnel shall be trained in the fire safety aspects denoted in this chapter and shall be responsible for issuing permits requiring compliance with the requirements found in Chapter 26. These permits shall be issued only to their employees or hot work operations under their supervision. 105.6.24 Industrial ovens. An operational permit is required for operation of industrial ovens regulated by Chapter 21. 105.6.25 Lumber yards and woodworking plants. An operational permit is required for the storage or processing of lumber exceeding 100,000 board feet (8,333 ft3) (236 m3). 105.6.26 Liquid- or gas-fueled vehicles or equipment in assembly buildings. (ESn An operational permit is required to display, operate or demonstrate liquid- or gas-fueled vehicles or equipment in assembly buildings. 105.6.27 LP-gas. An operational permit is required for: 1. Storage and use of LP-gas. Exception: A permit is not required for individual containers with a 500-gallon (1893 L) water capacity or less serving occupancies in Group R-3. 2. Operation of cargo tankers that transport LP-gas. 105.6.28 Magnesium. (ESn An operational permit is required to melt, cast, heat treat or grind more than 10 pounds (4.54 kg) of magnesium. ORDINANCE NO. 2007-023 20