Ord 2002-016 - Laserfiche WebLink

Home

Section 7-5-635: EMERGENCY WORK. A permit shall not be required prior to performance of work regulated by this Article when such work is necessary because of an emergency requiring the immediate performance of such work for the protection of a life or property, provided that the party performing such work shall notify the Building Official of the performance of said work within twenty-four (24) hours thereafter, and shall obtain a permit therefor pursuant to the provisions of this Article. Section 7-5-640: APPLICATION TO PUBLIC UTILITIES. The provisions of Section 7-5- 600 shall not apply to any electrical work performed by any electrical corporation, telephone corporation, railroad corporation or other public utility on or with electrical equipment owned or controlled or operated or used by or for the exclusive benefit of such corporation, in the conduct of its business as a public utility, or to any other work by such corporation, the performance of which is exempt under the Constitution of any law of the State of California from payment of any municipal tax. A11 other provisions of this Chapter shall apply, if applicable, to all electrical work performed by such public utility corporations. Nothing herein contained shall be construed to allow any such corporation to perform electrical work for the public, or to engage in the business of electrical contracting. Section 7-5-645: EXEMPTIONS FROM PERMIT REQUIREMENT. An electrical permit shall not be required for the following: (a) Portable motors or other portable appliances energized by the means of a cord or cable having an attachment plug end to be connected to an approved receptacle when that cord or cable is permitted by the Electrical Code; (b) Repair or replacement of fixed motors, transformers, or fixed approved appliances of the same type and rating in the same location; (c) Installation of temporary decorative lighting; (d) Repair or replacement of current -carrying parts of any switch, contactor or control device; (e) Reinstallation of attachment plug receptacles, but not the outlets associated therewith; (f) Repair or replacement of any overcurrent device of the required capacity in the same location; (g) Repair or replacement of electrodes or transformers of the same size and capacity for signs or gas tube systems; (h) Installation of taping joints;