Laserfiche WebLink
t - <br />STILES PAINT MFG, INC. <br />21595 CURT/S ST <br />HA YWARD, CA. 94545 <br />(510) 887-8868 FAX: (510) 887-5637 <br />1100-GLOSS Waterborne Enamel -DTM <br />164-S/G or SATIN Waterborne Enamel- DTM <br />Product Description: A single component, lead free, water-borne-alkyd-type enamel <br />formulated for exterior or interior use. It offers superior wear-resistance, gloss retention, <br />good chemical and solvent resistance. It can be used as a DTM (direct-to-metal) or <br />applied over aprimer -either way. It is an excellent paint product. <br />'`**Available Sheens: GLOSS, SEMI-GLOSS, Satin <br />Recommended Uses: As an exterior or interior equipment and building enamel, as a <br />protective coating against moderate chemical and fume exposure, excellent use for <br />machinery and other factory equipment. It is a one product package on multiple <br />substrates. concrete, steel, galvanized steel, wood and aluminum. Safety enamel: non- <br />flammable, non-polluting, low odor. It is a great choice for ornamental iron and other <br />fabricated or manufactured metal goods. <br />Weight per Gallon: 8.6-8.9 Ibs/gal. <br />Percent Solids by Weight: 38-42% <br />Percent Solid by Volume: 34-36% <br />`***Available Sheens: GLOSS, Semi-Gloss, Satin <br />Flash Point: Water base material. Flash point over 200' F <br />Drying Time: At 77' F and 50% relative humidity. <br />To Touch: 45 to 60 Minutes <br />To Recoat: Three hours <br />Application: Spray <br />Reducer: Water <br />Recommended Thickness: It should be applied at approx. 2 mils dry-film thickness <br />Coverage: <br />Theoretical At 1 Mil DFT 570 Sq ft per Gallon <br />Theoretical at 2 Mil DFT 250 - 300 Sq. ft per gallon <br />VOC: VOC COMPLIANT PAINT <br />Shelf Life: One Year from Date of Manufacture. <br />~PR7`PARATION: <br />AIf surfaces must be cured, firm and dry. Surfaces should also be clean, free of <br />dust, ail, grease and wax. Remove chalky or loose paint, rust, loose mil scale, <br />-nildew or other contamination or condition that would adversely affect the <br />performance of the coating. <br />Glean Up: Soap and water or R-101 <br />Caution: do +~ot take ir7temally Close cor~~fainer after each use. Keep cut of reach <br />of children. Do Trot apply if air or surface temperature is or may fall below 50~F <br />Wir`hin 2 hours of application. <br />