Laserfiche WebLink
of its business as a public utility, or to any other work by such corporation, the performance of <br />which is exempt under the Constitution of any law of the State of California from payment of any <br />municipal tax. All other provisions of this Chapter shall apply, if applicable, to all electrical <br />work performed by such public utility corporations. Nothing herein contained shall be construed <br />to allow any such corporation to perform electrical work for the public, or to engage in the <br />business of electrical contracting. <br />Section 7 -5 -645 EXEMPTIONS FROM PERMIT REQUIREMENT An electrical permit <br />shall not be required for the following: <br />(a) Portable motors or other portable appliances energized by the means of a cord or cable <br />having an attachment plug end to be connected to an approved receptacle when that cord <br />or cable is permitted by the Electrical Code; <br />(b) Repair or replacement of fixed motors, transformers, or fixed approved appliances of the <br />same type and rating in the same location; <br />(c) Installation of temporary decorative lighting; <br />(d) Repair or replacement of current - carrying parts of any switch, contactor or control <br />device; <br />(e) Reinstallation of attachment plug receptacles, but not the outlets associated therewith; <br />(f) Repair or replacement of any over current device of the required capacity in the same <br />location; <br />(g) Repair or replacement of electrodes or transformers of the same size and capacity for <br />signs or gas tube systems; <br />(i) Removal of electrical wiring; <br />(j) Installation of temporary wiring for experimental purposes in suitable experimental <br />laboratories; <br />(k) Installation of wiring for a temporary theater, motion picture or television stage sets; <br />(1) Installation of electrical wiring, devices, appliances, apparatus, or equipment operating at <br />less than twenty -five (25) volts and not capable of supplying more than fifty (50) watts of <br />energy; <br />(m) Installation of low- energy power, control and signal circuits of classes II & III as defined <br />in the Electrical Code." <br />ORDINANCE NO. 2010-017 2 <br />