|
SCHEDULE OF FEES FOR LABORATORY TESTING
<br /> Laboratory Test, Test Designation, and Price Per Test
<br /> Special preparation of standard test specimens will be charged at the technician's hourly rate
<br /> Ninyo & Moore is accredited to porforrn tho AASHTO equivalent of many ASTM test procedures.
<br /> Solis Concrete
<br /> Atterberg Limits, D 4318, CT 204 S 145 Cement Matysis Chemical and Physical. C 109 $ 1 .650
<br /> California Bearing Ratio (CBR). D 1883 $ 440 Compression Tests, 6x12 Cylinder. C 39 $ 22
<br /> Chloride and Sulfate Content. CT 417 & CT 422 $ 135 Concrete Mix Design Review, Job Spec $ 140
<br /> Consolidation. 0 2435. CT 219 $ 275 Concrete Ma Design, per Trial Batch, 6 cylinder, ACI $ 750
<br /> Consolidation — Time Rate. D 2435. CT 219 $ 70 Concrete Cores, Compression (excludes sampling), C 42 $ 55
<br /> Direct Shear — Remolded, Cr 3080 $ 290 Drying Shrinkage, C 157 $ 250
<br /> Direct Shear — Undisturbed, D 3080 $ 250 Flexural Test, C 78 - 5 50
<br /> Durability Index. CT 229 $ 150 Flexural Test, C 293 $ 55
<br /> Expansion Index, 0 4829, UBC 18-2 $ 165 Flexural Test, CT 523 $ 60
<br /> Expansion Potential (Method A), D 4546 5 145 Gunite/Shotcrete, Panels, 3 ad cores per panel and test. ACI $ 250
<br /> Expansive Pressure (Method C). D 4546 S 145 Jobsite Testing Laboratory Quote
<br /> Geofabric Tensile and Elongation Test, D 4632 $ 165 Lightweight Concrete Fill, Compression, C 495 • $ 40
<br /> Hydraulic Conductivity, D 5084 $ 300 Petrographic Analysis, C 856 $ 1 ,100
<br /> Hydrometer Analysis, D 422, CT 203 5 190 Splitting Tensile Strength, C 496 5 80
<br /> Moisture, Ash. & Organic Matter of Peat/Organic Soils $ 110
<br /> Moisture Only. D 2216, CT 226 $ 30 Reinforcing and Structural Stool
<br /> Moisture and Density. D 2937 $ 39 Fireproofing Density Test, UBC 7-6 $ 55
<br /> Permeability. CH, D 2434, CT 220 $ 230 Hardness Test, Rockwen. A -370 $ 50
<br /> pH and Resistivity, CT 643 $ 140 Filgh Strength Bolt, Nut & Washer Conformance. set. A-325 $ 120
<br /> Proctor Density D 1557. D 698, CT 216, & $ 180 Mechanically Spliced Reinforcing Tensile Test, ACI $ 95
<br /> PASHTO T -180 (Rock corrections add 580) Pre -Stress Strand (7 wire), A 416 S 140
<br /> R- value, D 2844, CT 301 $ 250 Chemical Anaysis, A -36. A-615 $ 120
<br /> Sand Equivalent, D 2419. CT 217 $ 90 Reinforcing Tensile or Bend up to No. 11, A 615 & A 706 $ 50
<br /> Sieve Analysis, D 422, CT 202 $ 110 Structural Steel Tensile Test: Up to 200.000 lbs.
<br /> Sieve Maysis, 200 Wash, D 1140, CT 202 $ 90 (machining extra), A 370 $ 70
<br /> Specific Gravity, D 854 $ 90 Welded Reinforcing Tensile Test Up to No. 11 bars, ACI 5 55
<br /> Triaxial Shear, C.D, D 4767. T 297 $ 390
<br /> Trialdal Shear, C.U., wlpore pressure, D 4767, T 2297 per pl $ 330 Asphalt Concrete
<br /> TriaxiN Shear, C.U.. w/o pore pressure, D 4767, T 2297 per pi $ 190 Asphalt Mbc Design, Caltrans $ 2 200
<br /> Triaxial Shear, U.U., D 2850 $ 140 Asphalt Ma Design Review, Job Spec $ 150
<br /> Unconfined Compression, D 2166, T 208 $ 100 Extraction, %Asphalt, including Gradation, D 2172, CT 310 $ 215
<br /> Wax Density, D 1188 $ 90 Film Stripping, CT 302 $ 100
<br /> Nveem Stability and Unit Weight CTM or ASTM, CT 366 $ 195
<br /> Roofing Marshall Stability, Flow and Unit Weight, T -245 $ 215
<br /> Built -up Roofing. cut-out samples, D 2829 $ 165 Maximum Theoretical Unit Weight. D 2041 $ 120
<br /> Roofing Materials Analysis, D 2829 $ 500 Swell, CT 305 $ 165
<br /> Roofing Tile Absorption, (set of 5), UBC 15-5 5 190 Unit Weight sample or core, D 2726, CT 308 $ 90
<br /> Roofing Tile Strength Test, (set of 5), UBC 15-5 $ 190
<br /> Aggregates
<br /> Masonry Absorption, Coarse, C 127 $ 35
<br /> Brick Absorption. 24 -hour submersion, C 67 $ 45 Absorption. Fine, C 128 $ 35
<br /> Brick Absorption, 5-hour boiling. C 67 $ 55 Clay Lumps and Friable Park des, C 142 $ 100
<br /> Brick Absorption, 7 -day. C 67 $ 60 Cleanness Value, CT 227 $ 120
<br /> Brick Compression Test, C 67 $ 45 shed Particles, CT 205 $ 140
<br /> Brick Efflorescence, C 67 $ 45 Durability, Coarse, CT 229 $ 130
<br /> Brick Modulus of Rupture, C 67 $ 40 Durability, Fine, C7 229 5 130
<br /> Brick Moisture as received. C 67 $ 35 Los Angeles Abrasion. C 131 or C 535 $ 180
<br /> Brick Saturation Coefficient, C 67 $ 50 Mortar making properties of fine aggregate, C 87 $ 275
<br /> Concrete Block Compression Test, 8x6x16, C 140 5 60 Organic Impurities, C 40 5 55
<br /> Concrete Block Conformance Package, C 90 $ 440 Potential Reactivity of Aggregate (Chemical Method). C 289 $ 390
<br /> Concrete Block Linear Shrinkage, C 426 $ 120 Sand Equivalent. CT 217 5 90
<br /> Concrete Block Unit Weight and Absorption. C 140 $ 55 Sieve Analysis. Coarse Aggregate, C 136 5 105
<br /> Cores, Compression or Shear Bond. CA Code 5 55 Sieve Analysis, Fine Aggregate (including vrash). C 136 $ 105
<br /> Masonry Grout, 3x3x6 prism compression. UBC 21-18 5 30 Sodium Sulfate Soundness (per size fraction). C 88 $ 160
<br /> Masonry Mortar. 2x4 cylinder compression. UBC 21-16 $ 30 Specific Gravity, Coarse. C 127 $ 75
<br /> Masonry Prism, half size, compression, UBC 21 -17 5 110 Specific Gravity, Coarse. C 128 5 85
<br /> •
<br /> Consulting Services Agreement between 14901 East 14th Street Site Remediation
<br /> City of San Leandro and Ninyo & Moore -- Exhibit D Page 25 of 25
<br />
|