|
SCHEDULE OF FEES FOR LABORATORY TESTING
<br /> Laboratory Test, Test Designation, and Price Per Test
<br /> Special preparation of standard tat specimens still be charged at the technician's hourly rate
<br /> Ninyo & Moore is accredited to perform tho AASHTO equivalent of many ASTM test procedures.
<br /> Solis Concrete
<br /> Anerberg Limits, D 4318, CT 204 $ 145 Cement Analysis Chemical and Physical, C 109 $ 1 550
<br /> Califomia Bearing Ratio (CBR), D 1883 S 440 Compression Tests, 6x12 Cylinder, C 39 $ 22
<br /> Chloride and Sulfate Content, CT 417 & CT 422 S 135 Concrete Mix Design Review, Job Spec $ 140
<br /> Consolidation, D 2435. CT 219 $ 275 Concrete Mix Design, per Trial Batch, 6 cylinder, ACI $ 750
<br /> Consolidation — Tune Rate, 0 2435, CT 219 $ 70 Concrete Cores, Compression (exdudes sampling), C 42 $ 55
<br /> Direct Shear — Remolded, 03080 S 290 Drying Shrinkage, C 157 $ 250
<br /> Direct Shear — Undisturbed. 0 3080 S 250 Flexural Test, C 78 S 50
<br /> Durability Index, CT 229 $ 150 Flexural Test, C 293 $ 55
<br /> Expansion Index, D 4829, UBC 18-2 $ 165 Flexural Test, CT 523 $ 60
<br /> Expansion Potential (Method A), D 4546 $ 145 Gunite/Shotcrete, Panels, 3 cut cores per panel and test, ACI $ 250
<br /> Expansive Pressure (Method C), D 4546 $ 145 Jobsite Testing Laboratory Quote
<br /> Geofabric Tensile and Elongation Test, D 4632 $ 165 Lightweight Concrete Fit, Compression, C 495 • $ 40
<br /> Hydraulic Conductivity, D 5084 $ 300 Petrographic Anaysis, C 856 $ 1 ,100
<br /> Hydrometer Analysis, D 422, CT 203 $ 190 Splitting Tensile Strength, C 496 $ 80
<br /> Moisture, Ash, & Organic Matter of Peat/Organic Soils S 110
<br /> Moisture Only, D 2216, CT 226 $ 30 Reinforcing and Structural Stool
<br /> Moisture and Density, D 2937 $ 39 Fireproofing Density Test. UBC 7-6 $ 55
<br /> Penneab8dy, CH, D 2434, CT 220 S 230 Hardness Test, Rockwell, A -370 $ 50
<br /> pH and Resistivity, CT 843 S 140 Ffgh Strength Bolt, Nut & Washer Conformance, set, A -325 S 120
<br /> Proctor Density 0 1557. D 698, CT 216, & $ 180 Mechanically Spliced Reinforcing Tensile Test, ACI S 95
<br /> AASHTO T -180 (Rock corrections add $80) Pre-Stress Strand (7 wire), A 416 $ 140
<br /> R -vatue, D 2844, CT 301 S 250 Chemical Analysis, A -36, A-615 S 120
<br /> Sand Equivalent, D 2419, CT 217 S 90 Reinforcing Tensile or Bend up to No. 11, A 615 & A 706 S 50
<br /> Sieve Analysis, D 422. CT 202 $ 110 Saudural Steel Tensile Test: Up to 200.0001bs.
<br /> Sieve Analysis, 200 Wash, 0 1140, CT 202 $ 90 (machining extra). A 370 $ 70
<br /> Specific Gravity, D 854 $ 90 Welded Reinforcing Tensile Test: Up to No. 11 bars, ACI $ 55
<br /> Triaxial Shear, C.D, D 4767, T 297 $ 390
<br /> Triaxial Shear, C.U., w/pore pressure, 0 4767, T 2297 per pt S 330 Asphalt Concrete
<br /> Thalia) Shear, C.U., w/o pore pressure, D 4767, T 2297 per pt $ 190 Asphalt Ma Design, Cattrare S 2 ,200
<br /> Triaxial Shear, U.U., D 2850 $ 140 Asphalt Mix Design Review, Job Spec $ 150
<br /> Unconfined Compression, D 2166, T 208 $ 100 Extraction, %Asphalt. including Gradation. D 2172, CT 310 $ 215
<br /> Wax Density, D 1188 S 90 Fdm Stripping, CT 302 $ 100
<br /> Hveem Stabiilty and Unit Weight CTM or ASTM. CT 366 S 195
<br /> Roofing Marshall Stability, Flow and Unit Weight. T -245 $ 215
<br /> Built -up Roofing, cut-out samples, D 2829 $ 165 Maximum Theoretical Unit Weight. D 2041 $ 120
<br /> Roofing Materials Analysis, D 2829 $ 500 Swell, CT 305 $ 165
<br /> Roofing Tde Absorption, (set of 5), UBC 15-5 S 190 Unit Weight sample or core, D 2726, CT 308 $ 90
<br /> Roofing Tle Strength Test, (set of 5). UBC 15.5 $ 190
<br /> Aggregates
<br /> Masonry Absorption, Coarse, C 127 $ 35
<br /> Brick Absorption, 24 -hour submersion, C 67 S 45 Absorption, Fine, C 128 $ 35
<br /> Brick Absorption, 5-hour boiling, C 67 $ 55 Gay Lumps and Friable Particles, C 142 $ 100
<br /> Brick Absorption, 7-day, C 67 $ 60 Cleanness Value, CT 227 $ 120
<br /> Brick Compression Test, C 67 S 45 Crushed Padides, CT 205 $ 140
<br /> Brick Efflorescence, C 67 $ 45 Durability, Coarse, CT 229 S 130
<br /> Brick Modulus of Rupture, C 67 $ 40 Durability. Fine, CT 229 S 130
<br /> Brick Moisture as received. C 67 $ 35 Los Angeles Abrasion, C 131 or C 535 $ 180
<br /> Brick Saturation Coefficient, C 67 S 50 Mortar making properties of fine aggregate. C 87 $ 275
<br /> Concrete Block Compression Test 8x8x16, C 140 $ 60 Organic Impurities, C 40 $ 55
<br /> Concrete Block Conformance Package, C 90 $ 440 Potential Reactivity of Aggregate (Chemical Method), C 289 $ 390
<br /> Concrete Block Linear Shrinkage, C 426 $ 120 Sand Equivalent, CT 217 $ 90
<br /> Concrete Block Unit Weight and Absorption. C 140 $ 55 Sieve Analysis, Coarse Aggregate, C 138 $ 105
<br /> Cores, Compression or Shear Bond, CA Code $ 55 Sieve Analysis, Fine Aggregate (including wash). C 136 $ 105
<br /> Masonry Grout. 3x3x6 prism compression, UBC 21 -18 $ 30 Sodium Sulfate Soundness (per size fraction). C 88 $ 160
<br /> Masonry Mortar. 2x4 clnder compression, UBC 21 -16 $ 30 Specific Gravity, Coarse. C 127 $ 75
<br /> Masonry Prism, half size, compression, UBC 21 -17 S 110 Specific Gravity, Coarse. C 128 $ 85
<br /> •
<br /> Consulting Services Agreement between 14901 East 14 Street Site Remediation
<br /> City of San Leandro and Ninyo & Moore — Exhibit D Page 25 of 25
<br />
|