Laserfiche WebLink
FXHTRTT R <br />RAPID DRY, WATER -BORNE TRAFFIC PAINT SPECIFICATIONS <br />Black, Yellow and White <br />DESCRIPTION <br />This covers an advance technology of water -borne, emulsion -based traffic paints which perform equal to the <br />quality solvent -based paints. Applied at a normal marking paint film thickness of 10 -15 mils, dry times can <br />approach comparable to solvent -based paints. Applied to either asphaltic or Portland cement concrete <br />pavements, durability is excellent and will not contribute to asphalt cracking, and can be applied hot or cold with <br />conventional air or airless application equipment. <br />These products meet the State of California Department of Transportation Specification for Rapid Dry, Water - <br />Borne Traffic Paint. <br />CHARACTERISTICS <br />Black <br />Yellow <br />White <br />Viscosity O 77 0 1 7 ±1 0 F (25 ±0.5 0 C), ASTM DT62, KU <br />80 -90 <br />80 -90 <br />80 -90 <br />Fineness of dispersion, ASTM D1210, Hegman <br />3.0 min <br />3.0 min <br />3.0 min <br />Dry to No- Pick -Up c� 77 °F without Beads, <br />ASTM D711, minutes <br />10 max <br />10 max <br />10 max <br />Dry Through, minutes <br />20 max <br />20 max <br />20 max <br />Volatile Organic Compound, Grams/Liter of paint <br />Excluding water and exempt solvents <br />150 max <br />150 max <br />150 max <br />Flash Point, ASTM D93, °F ( °C) <br />100 min <br />100 min <br />100 min <br />Static Heat Shear Stability, I week O 120 °F <br />(49 ±0.5 0 C), Viscosity, KU <br />68 -90 <br />68 -90 <br />68 -90 <br />Heat shear Stability, Viscosity, KU <br />68 -95 <br />68 -95 <br />68 -95 <br />Scrub Resistance, Cycles <br />800 min <br />800 min <br />800 min <br />Dry Opacity <br />0.90 min <br />0.90 min <br />0.90 min <br />Reflectance <br />85 min <br />43 -55 <br />87 min <br />Color, Fed'1 Std. 559a <br />-- - - - - -- <br />#33538 <br />#37925 <br />Freeze -Thaw, ASTM D2243 <br />Passes <br />Passes <br />Passes <br />For night reflectivity, these paints accept drop -on -beads at the rate of 4 to 6lbs per gallon of paint applied <br />APPLICATION: <br />Avoid striping with water -based paints over areas of heavy oil and grease deposits. Such areas should be <br />prepared by sandblasting or using high pressure spray and detergent followed by a clear water rinse. Clean <br />surfaces with excessive dirt and dust build up with water spray. Surfaces must be thoroughly dry prior to paint <br />application. Concrete surfaces should be followed to dry 24 hours after a soaking rainfall or high pressure <br />washing. <br />COVERAGE: <br />100 -110 Square feet per gallon at 15 mils wet film thickness. <br />PACKAGING: <br />The paints are available in bulk containers capable of holding 250 and 345 gallons, 55- galons steel drums, 5- <br />gallon pails. <br />11- 12.007 CITY -WIDE STREET RE- STRIPING 12 <br />