Agmt 2012 Chrisp Company - Laserfiche WebLink

Home

EXHIBIT B RAPID DRY, WATER -BORNE TRAFFIC PAINT SPECIFICATIONS Black , Yellow and White • DESCRIPTION This covers an advance technology of water -borne, emulsion -based traffic paints which perform equal to the quality solvent -based paints. Applied at a normal marking paint film thickness of 10 -15 mils, dry times can approach comparable to solvent -based paints. Applied to either asphaltic or Portland cement concrete pavements, durability is excellent and will not contribute to asphalt cracking, and can be applied hot or cold with conventional air or airless application equipment. These products meet the State of California Department of Transportation Specification for Rapid Dry, Water - Bome Traffic Paint. CHARACTERISTICS Black Yellow White Viscosity @ 77 °F±I °F (251-0.5 °C), ASTM DT62, KU 80 -90 80 -90 80 -90 Fineness of dispersion, ASTM D1210, Hegman 3.0 min 3.0 min 3.0 min Dry to No-Pick -Up @ 77 °F, without Beads, ASTM D71 I, minutes 10 max 10 max 10 max Dry Through, minutes 20 max 20 max 20 max Volatile Organic Compound, Grams/Liter of paint Excluding water and exempt solvents 150 max 150 max 150 max Flash Point, ASTM D93, °F ( °C) 100 min 100 min 100 min Static Heat Shear Stability, 1 week @ 120 °F (49±0.5 °C), Viscosity, KU 68 -90 68 -90 68 -90 Heat shear Stability, Viscosity, KU 68 -95 68 -95 68 -95 Scrub Resistance, Cycles 800 min 800 min 800 min Dry Opacity 0.90 min 0.90 min 0.90 min Reflectance 85 min 43 -55 87 min Color, Fed'l Std. 559a - - - -- #33538 #37925 Freeze -Thaw, ASTM D2243 Passes Passes Passes For night reflectivity, these paints accept drop -on -beads at the rate of 4 to 6Ibs per gallon of paint applied APPLICATION: Avoid striping with water -based paints over areas of heavy oil and grease deposits. Such areas should be prepared by sandblasting or using high pressure spray and detergent followed by a clear water rinse.- Clean surfaces with excessive dirt and dust build up with water spray. Surfaces must be thoroughly dry prior to paint application. Concrete surfaces should be followed to dry 24 hours after a soaking rainfall or high pressure washing. • COVERAGE: 100 -110 Square feet per gallon at 15 mils wet film thickness. PACKAGING: The paints are available in bulk containers capable of holding 250 and 345 gallons, 55- galons steel drums, 5- gallon pails. 11 12.007 CITY -WIDE STREET RE- STRIPING 12 •