Inst 2015286625 - Laserfiche WebLink

Home

' r . Q. If vehicle washing will be performed onsite, commercial/industrial facilities having vehicle/equipment cleaning needs shall either provide a roofed, bermed area for washing activities or discourage vehicle/equipment washing by removing hose bibs (faucets) and installing signs prohibiting such uses. If vehicle washing will be performed onsite. vehicle/equipment washing areas shall be paved, designed to prevent run-on to or runoff from the area, and plumbed to drain to the sanitary sewer. A sign shall be posted indicating the location and allowed uses in the designated wash area. R. Vehicle/Equipment repair and maintenance shall be performed in a designated area indoors, or if such services are performed outdoors (under the covered area), in an area designated to prevent the run-on and runoff of stormwater. S. Outdoor vehicle services with potential to generate small particles, such as metal filings. brake dust,liquid spill, such as oil change,radiator work shall be performed under cover. T. Secondary containment shall be provided for exterior work areas (under the covered area) where motor oil, brake fluid, gasoline, diesel fuel, radiator fluid, acid-containing batteries or other hazardous materials or hazardous wastes are used or stored. Drains shall not be installed within the secondary containment areas. U. Vehicle service facilities shall not have floor drains. V. Tanks, containers or sinks used for parts cleaning and rinsing shall not be connected to the storm drain system. Tanks, containers or sinks used for such purposed may only be connected to the sanitary sewer system if allowed by an industrial waste discharge permit. The applicant shall contact City of San Leandro Wastewater Pollution. Control Plant for specific connection and discharge requirements. W. Inspect all vehicles left on site for drips and place drip pans under leaking vehicles. Drain fluids from all leaking or wrecked vehicle immediately,prior to storage. VII. FIRE DEPARTMENT REQUIREMENTS A. The plans are required to meet the adopted codes and standards at the time of submittal. B. The plans will need to meet the fire department access requirements. The following is to be shown on the plans submitted for approval: A site plan drawn to a scale of 1=20', 30' or 40'. The fire department access is to be a 20-foot wide all weather surface capable of supporting 75,000 pounds. On the plans clearly show the fire department access through the site. Include the turning radius at all changes of direction of the access road. When the gates are in the open position the clear unobstructed width shall be 20 feet. C. Fire department key boxes or gate switches are required on the gates across the fire department access. D. A fire department key box for the office is required. E. A fire extinguisher is required in the office. Agreement to Conditions December 4,2014 PLN2014-00026 Pam-9 of 111