4A Public Hearing 2016 0516 - Laserfiche WebLink

Home

Product Overview Features WattStopper www.wattstopper.com 800.879.8585 Description The FSP -211 mounts in an outdoor lighting fixture and provides multi-level control based on motion. The sensor also includes a photocell to measure the ambient light level. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non -dimming ballasts and, with an FSP -Lx Lens, is rated forwet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles. Operation The sensor ramps lighting On to the selected High mode level when motion is first detected and the ambient light levet is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. If the sensor detects motion before the lights turn Off, it ramps the light level back to High, unless the daylight contribution is sufficient to hold Lighting at Low. • Provides line voltage On/Off switching and 0-10 VDC dimming control • Works with ballasts or LED drivers • High and low modes fully adjustable from 0 to 10V • Time delay from 5 to 30 minutes • Optional cut off delay • Adjustable ramp up and fade down times Adjustable via handheld wireless configuration tool IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8' to 40' Adjustable time delay and cut off delay PROJECT LOCATIOWTYPE Wireless Handheld Configuration Tool Initial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR- 100 is also used to initiate automatic calibration of the FSP -211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to five sensor parameter profiles to speed configuration of multiple sensors. Applications The slim, low -profile FSP -211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP -Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40'. • Optional daylighting setpoint features automatic calibration, or permits manual adjustment • Configuration tool stores five sensor profiles for quick setup and adjustment of multiple sensors • Polycarbonate construction, flame retardant, UV resistant, impact resistant, recyclable • UL244A and UL508, IP66 rated (when fully assembled and installed) for use in wet locations Fully adjustable high and low dimmed light levels 'r ±' ' Designed for LED fixtures; rated 11511 for extreme temperatures and t�511 I)' l!((i; up to 200,000 on/off cycles .4 PROiRESS Hold off setpoint with automatic calibration option for convenience and added energy savings Product Overview Features WattStopper www.wattstopper.com 800.879.8585 Description The FSP -211 mounts in an outdoor lighting fixture and provides multi-level control based on motion. The sensor also includes a photocell to measure the ambient light level. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non -dimming ballasts and, with an FSP -Lx Lens, is rated forwet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles. Operation The sensor ramps lighting On to the selected High mode level when motion is first detected and the ambient light levet is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. If the sensor detects motion before the lights turn Off, it ramps the light level back to High, unless the daylight contribution is sufficient to hold Lighting at Low. • Provides line voltage On/Off switching and 0-10 VDC dimming control • Works with ballasts or LED drivers • High and low modes fully adjustable from 0 to 10V • Time delay from 5 to 30 minutes • Optional cut off delay • Adjustable ramp up and fade down times Adjustable via handheld wireless configuration tool IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8' to 40' Adjustable time delay and cut off delay PROJECT LOCATIOWTYPE Wireless Handheld Configuration Tool Initial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR- 100 is also used to initiate automatic calibration of the FSP -211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to five sensor parameter profiles to speed configuration of multiple sensors. Applications The slim, low -profile FSP -211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP -Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40'. • Optional daylighting setpoint features automatic calibration, or permits manual adjustment • Configuration tool stores five sensor profiles for quick setup and adjustment of multiple sensors • Polycarbonate construction, flame retardant, UV resistant, impact resistant, recyclable • UL244A and UL508, IP66 rated (when fully assembled and installed) for use in wet locations