Laserfiche WebLink
Performance Summary For 75T <br />Project: Climatec Energy - Mitch California Project 10/22/2015 <br />Prepared By 10:52AM <br />Condenser Fan Motor Qty: <br />4 <br />Condenser Fan Motor FLA (ea): ----------- - ----------- - ----------- - ----------- - ----------- <br />- ----------- - ----------- - ----------- 3.3 <br />Return Fan Fan Motor Qty:-------------------------------------------------------------------------------------------------1 <br />102.7 <br />Return Fan Fan Motor HP(ea.):...... -........... -........... -........... -........... <br />-........... - ........... - ..... .:....-.25 <br />Return Fan Fan Motor FLA (ea.):- <br />34 <br />PowerSupply MCA---------------------------------------------------------------------------------------------------------------220 <br />71.3 <br />Power Supply M 0 C P (Fuse or HACR):------------------------------------------------- <br />------------------------------------950 <br />Compressor Count (Al ,A2):.-.-.-.- -----------.. <br />------------------------------------------------------------------------------ <br />3 <br />Compressor FLA (ea), (A1,A2):...........---..........-...........---........._.-............-............-............-............-26.9 <br />98.2 <br />Compressor LRA (ea), (A1 ,A2):- - <br />179 <br />Compressor Count (B 1 ,B2):------------------------------------------------------- <br />88.0 <br />Compressor FLA (ea),(B1,B2):------------ ----------- ----------- ----------- <br />----------- ----------- ----------- --------- 26.9 <br />Compressor LRA (ea). (131 ,B2):----------------------- <br />-------------------------------------------179 <br />Acoustic Information <br />Discharge l Inlet Duct Sound Powertest data rated in accordancewith the AHRI260 Standard. Return fan or power exhuast <br />fans not included in sound data. <br />Calculation methods used in this program are patterned after the ASHRAE Guide. other ASHRAE Publications and the AHRI <br />Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed <br />that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical <br />estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be <br />appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate <br />an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an <br />Acoustical Engineer or a person with sound prediction expertise should be consulted. <br />Advanced Acoustics <br />Advanced Accoustics Parameters <br />1. Unit height above ground: _----------- ----------- ..-.-._30.0 ft <br />2. Horizontal distance from unitto receiver :_------------ -50.0 ft <br />3. Receiver height above ground------------- ----------- --5.7 ft <br />Detailed Acoustics Information <br />Applied Rooftop Builder 3.19k Page 8 of 15 <br />Discharge, Lw <br />Inlet, Lw <br />Outdoor, Lw <br />63 Hz <br />102.7 <br />94.7 <br />60.5 <br />125 Hz <br />102.8 <br />84.8 <br />71.3 <br />250 Hz <br />97.8 <br />78.8 <br />78.2 <br />500 Hz <br />98.2 <br />78.2 <br />83.8 <br />1000 Hz <br />88.0 <br />71.0 <br />86.6 <br />2000 Hz <br />81.3 <br />70.3 <br />85.0 <br />4000 Hz <br />73.2 <br />60.2 <br />79.6 <br />8000 Hz <br />52.9 <br />45.9 <br />69.8 <br />Discharge l Inlet Duct Sound Powertest data rated in accordancewith the AHRI260 Standard. Return fan or power exhuast <br />fans not included in sound data. <br />Calculation methods used in this program are patterned after the ASHRAE Guide. other ASHRAE Publications and the AHRI <br />Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed <br />that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical <br />estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be <br />appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate <br />an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an <br />Acoustical Engineer or a person with sound prediction expertise should be consulted. <br />Advanced Acoustics <br />Advanced Accoustics Parameters <br />1. Unit height above ground: _----------- ----------- ..-.-._30.0 ft <br />2. Horizontal distance from unitto receiver :_------------ -50.0 ft <br />3. Receiver height above ground------------- ----------- --5.7 ft <br />Detailed Acoustics Information <br />Applied Rooftop Builder 3.19k Page 8 of 15 <br />