4A Public Hearing 2016 0516 - Laserfiche WebLink

Home

Housing • The LED light engines are constructed of heavy-duty, die-cast aluminum, with external heat radiating fins. Driver Compartment • The separate driver housing is constructed of extruded aluminum, with cast aluminum end covers and stainless steel fasteners, for easy access to the LED driver(s); allowing for cooler operation and longer driver life. One-piece gasketing is utilized throughout the fixture for weather tight operation. Thermal Management • The BOW SX Series provides excellent overall thermal management by maximizing the fature's heat sink capabilities. This enables the BOW SX Series to withstand higher ambient temperatures and drive currents without degrading LED life. • The L70 test determines the point in an LEDs life when it reaches 70 percent of its initial output. The BOW SX Series LEDs have been determined to last a minimum of 100,000 hours in 25°C environments when driven at 350 ri Optical System • The highest lumen output, Evo/C LEDs are utilized in the BOW SX Series. IES distribution Types I, II, III, IV, V, V -W, T15 & T40 are available. LED light engines come in multiples of 16 LEDs. • CRI values are 70. Quali-Guard® Finish • The finish is a Quali-Guard®textured, chemically pretreated through a multiple - stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of 3-5 millimeter thickness. Finish is oven -baked at 400 IF to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors. Finish is guaranteed for five (5) years. Mounting • An adjustable knuckle slip fits over a 2 318" Tenon, and allows for up to 900 degrees of vertical adjustment in 10° degree increments from horizontal, as well as full side to side adjustment with the knuckle mount. • A round extruded 6" aluminum, Bolt -On Arm (BOA) with an in -pole nut plate. A Round Pole Plate Adapter (RPP) is required for mounting to round poles. • A cast wall mount plate is available for wall mount applications EPA DATAI BSX-2 I BSX-3 I BSX-4 E-0 1 .5 1 .7 1 .9 BOW SX EEE Electrical Assembly • The BOW SX Series is supplied with a choice of 350, 530, 700, or 1000 mA high-performance LED drivers, that accept 120v thru 480x, 50 Hz to 60 Hz, input. Power factor of 95%. Rated for -40 °C operations. • 10 kV surge protector supplied as standard Warranty • Five (5) year Limited Warranty on entire system, including finish. For full warranty information, please visit Vision aireLighting. com. Options • Button Type Photocell • Photocell & Receptacle Photo Receptacle - Round pole plate adapter • 0-10 Volt Dimming Driver • Motion Sensor Listings BOW SX Series is UL Listed, suitable for wet locations IP65 Powder Coated Tough T". POWDER U COATED IP65 C us ial Touli RATED LISTED DesignLlghls Corsodiuin (DLO) qualified Product. Some configuratlors of this product family may not be DesIgnLlghts Consortium (DLq Ihted, please refer to the DLC pushed products list to confirm feted configurations. http;//www.deslgnllghls.org/ t'I�IgHlilllllll� ` BSX BOA Mount Shown # LEDs mA Type 1 Type 2 Type 3 Type 4 Type 5 Type 5W Watts 350 3554 3407 3139 3482 4172 3580 35 32 530 5264 5046 4649 5157 6179 5302 54 700 6376 6112 5631 6246 7484 6422 72 1000** 8135 8304 7651 8487 8913 8726 111 350 5293 5073 4674 5185 6213 5331 53 530 7553 7240 6671 7400 8867 7608 81 48 700 9533 9138 8420 9340 11191 9603 110 1000** 12202 12456 11476 12730 13370 13089 166 350 6981 6692 6166 6839 8195 7032 71 530 9882 9472 8728 9681 11600 9954 106 64 700 1 12555 1 12035 11089 12301 14738 12647 144 1000** 1 16269 1 16608 15302 16974 17827 17452 222 Visit vwwd.VisionaireLighting.corn for up-to-the-minute chart information, including types not listed here * For 4000K multiply values by 0.90 —Test data Dendina.