My WebLink
|
Help
|
About
|
Sign Out
Home
Ord 2016-012
CityHall
>
City Clerk
>
City Council
>
Ordinances
>
2016
>
Ord 2016-012
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
7/18/2017 10:07:01 AM
Creation date
10/28/2016 4:09:41 PM
Metadata
Fields
Template:
CM City Clerk-City Council
CM City Clerk-City Council - Document Type
Ordinance
Document Date (6)
10/3/2016
Retention
PERM
Document Relationships
_CC Agenda 2016 1003 RG
(Reference)
Path:
\City Clerk\City Council\Agenda Packets\2016\Packet 2016 1003
8I Consent 2016 1003
(Reference)
Path:
\City Clerk\City Council\Agenda Packets\2016\Packet 2016 1003
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
194
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
RM District <br />8 square feet for residential uses, per frontage unless <br />a greater area, not to exceed 32 square feet, is <br />approved as a condition of a use permit, as <br />reasonable and necessary for identification of a <br />development or use on a site over 2 acres. 12 square <br />feet for permitted nonresidential uses subject to prior <br />a royal of the Zoning Enforcement Official. <br />P;�D Districts <br />40 s uare feet per frontage. <br />CN, CC, DA -1, DA -2, DA -3, DA- <br />2 square feet per lineal foot of frontage up to 55 feet of <br />4, DA -5-,- DA -6, CS, NA -1, NA -2, <br />frontage; 15 times square root of frontage for sites <br />SA -1, SA -2, SA -3, IL, IG, IP, IT <br />with more than 55 feet of frontage. <br />.Districts <br />CR, OS, PS, and PD Districts <br />As prescribed by use permit. <br />1. Only the frontage that is developed or will be developed with an approved <br />building permit shall be counted for purposes of determining the maximum <br />allowable sign area; vacant land reserved for future development may not be <br />used in determining the maximum allowable sign area. <br />2. The sign area may be allocated between wall signs, freestanding signs, and <br />projecting signs, provided that each sign conforms to the applicable regulations <br />of this Section. <br />3. No sign or sign area permitted on one frontage shall be transferred to another <br />frontage except in accord with a Master Sign Plan prepared pursuant to <br />Section 4-1810. <br />B. Wall Siqns. <br />1. Wall signs shall not project above an eave or parapet of the wall on which the <br />sign is mounted, including the eave of a mansard roof. <br />2. A wall sign opposite an interior property line shall be five (5) feet or one-tenth <br />(1/10) the lot width from the property line, whichever is greater. <br />3. A wall sign shall not project more than two (2) feet from the face of the <br />building. <br />C. Window Sians. <br />1. For the purpose of this Section, a window shall be defined as that portion of a <br />first or second floor fagade consisting of a glass -like material designed to <br />provide viewing of the interior from an adjacent exterior walkway and which <br />shall be no less than seventy-five (75) percent transparent from the exterior <br />Ordinance , Exhibit E: Amended Article 18 <br />Note: underlined and bolded text represents new text; strike thFough represents text to be eliminated <br />
The URL can be used to link to this page
Your browser does not support the video tag.