Laserfiche WebLink
<br />17 <br />Licensee from the responsibility for and obligation to correct any errors or omissions that <br />may be contained in the Approved Plans and related Regulatory Approvals. Licensee <br />shall notify the Engineering and Transportation Department immediately upon discovery <br />of any omissions or errors, and Licensee shall obtain required approvals of any <br />amendments to previously Approved Plans before proceeding with any current or pending <br />equipment installation. <br />7.2 Installation. <br />Licensee shall not commence installation of Equipment on the License Area until the City <br />has given Licensee notice to proceed by delivery of the countersigned copy of the <br />Acknowledgment Letter confirming the Commencement Date under Section 4.1.2 <br />(Commencement Date) and by issuing the Encroachment Permit under Section 6.2 (Regulatory <br />Approval Required). When installing Equipment, Licensee must strictly comply with the <br />Encroachment Permit and Approved Plans as originally approved, or, if applicable, as amended <br />or corrected. <br />7.3 Notice Required Prior to Installation. <br />Licensee shall not commence installation of Equipment on the License Area until <br />Licensee has provided at least 24 hours’ prior notice of the installation, by first requesting an <br />inspection using the City’s Inspection Hot-Line telephone system, 510-577-3308, to disclose the <br />Encroachment Permit number and License Area location. <br />7.4 Cost of Labor and Materials. <br />Licensee is responsible for all direct and indirect costs (labor, materials, and overhead) <br />for designing, purchasing, and installing Equipment in accordance with the Approved Plans and <br />all applicable Laws. Licensee also shall bear all costs of obtaining all Regulatory Approvals <br />required in connection with the installation, and Licensee shall satisfy any conditions or mitigation <br />measures arising from Licensee’s proposed installation. Licensee shall timely pay for all labor, <br />materials, and Equipment and all professional services related to the Permitted Use. <br />7.5 No Alteration of City’s Existing Equipment or Infrastructure. <br />Neither Licensee nor its Agents or Invitees shall remove, damage, or alter in any way any <br />City Property, including City Poles and supporting infrastructure, pull boxes, electrical equipment, <br />wiring, and electrical vaults, without the express permission of the Engineering and <br />Transportation Director, except as authorized by the Approved Plans. <br />7.6 Standard of Work. <br />Licensee must install and perform all other work on Equipment in strict compliance with <br />Approved Plans and applicable City standards diligently and in a skillful and workmanlike <br />manner. Prior to performing any work that requires excavation, Licensee must notify <br />Underground Service Alert (ph. 800-227-2600 or 811) at least 72-hours in advance so existing <br />buried utilities can be located and marked. After performing any work on the License Area, <br />Licensee shall leave it and other City Property in a condition as good as it was before the work. <br /> <br />7.7 Licensee’s Contractors <br />Licensee shall use only qualified and properly trained persons and appropriately licensed <br />contractors for all work performed on or about the License Area in conformance with Section <br />13.2 (Personnel Safety Training). At least five (5) business days before any work commences on <br />or about the License Area, Licensee shall provide the City with: (1) a schedule with all activities <br />to be performed in connection with the work; and (2) a list with all the names, contractor’s <br />license numbers, contact information, and business addresses for all contractors who will <br />perform the work.