Laserfiche WebLink
Non-Professional Services Agreement between July 6, 2021 <br />City of San Leandro and Redwood Painting Company, Inc. Exhibit A Page 19 of 24 <br />4)Recoat or apply succeeding epoxy coats within 30 days or within time <br />limits recommended by manufacturer, whichever is shorter. Prepare <br />surfaces for recoating in accordance with manufacturer's instructions. <br />3.09 ASPHALT VARNISH <br />A. Preparation: <br />1.Prepare surfaces in accordance with general preparation requirements. <br />B. Application: <br />1.Apply coatings in accordance with general application requirements and as <br />follows: <br />a.Apply minimum 2 coats. <br />3.10 PROTECTIVE COAL TAR <br />A. Preparation: <br />1.Prepare surfaces in accordance with general preparation coal tar <br />requirements. <br />B. Application: <br />1.Apply coatings in accordance with general application requirements and as <br />follows: <br />a.Apply minimum 20 mils dry film thickness coating. <br />3.11 COAL TAR EPOXY <br />A. Preparation: <br />1.Prepare surfaces in accordance with general preparation requirements and <br />as follows: <br />a.Abrasive blast iron or steel surfaces to be coated as submerged metal in <br />accordance with SSPC SP-5. Prepare other metal surfaces to be coated <br />with coal tar epoxy in accordance with epoxy manufacturer's instructions. <br />B. Application: <br />1.Apply coatings in accordance with general application requirements and as <br />follows: <br />a.Waterproofing outside surfaces of concrete structures: Apply minimum 2 <br />coats with total dry film thickness of 40 mils. <br />b.All other locations: Apply 2 coats of 8 mils each for a total 16 mils dry film <br />thickness. <br />c.Apply coal tar epoxy on blasted steel on same day that steel is blasted. <br />d.Apply succeeding coats over previous coat as soon as application does <br />not cause sagging, within the following times, or as recommended by the <br />coating manufacturer, whichever is sooner. <br />2.Average Temperature Degrees <br />643