Laserfiche WebLink
<br /> <br /> <br />CHAPTER 4.12 SIGNS <br />SECTION 4.12.112 Regulations for On-Premises Signs <br />A. Maximum Total Sign Area. The maximum total sign area per tenant occupancy, excluding <br />temporary signs and exempt signs, shall be as follows: <br /> <br />Zoning District Maximum Total Sign Area <br />RD, RO, and RS Districts 24 square feet for permitted nonresidential uses, subject to <br />prior approval of the Zoning Enforcement Official. <br />RM District <br />• Residential use: 8 square feet per frontage. <br />• Exception for Residential sites over 2 acres: A greater <br />area not to exceed 32 square feet may be approved as a <br />condition of a use permit, as reasonable and necessary <br />for identification of a development or use. <br />• Permitted Nonresidential Uses: 12 square feet subject to <br />prior approval of the Zoning Enforcement Official. <br />B-TOD, CC, CN, CS, DA-1, DA-2, DA-3, <br />DA-4, DA-6, NA-1, NA-2, SA-1, SA-2, <br />SA-3, IL, IG, IP, IT Districts <br />• Up to 55 feet of frontage: 2 square feet per lineal foot of <br />frontage. <br />• Sites with more than 55 feet of frontage: 15 times square <br />root of frontage. <br />CR, OS, PD, and PS Districts As prescribed by use permit. <br />P District 40 square feet per frontage. <br /> <br />1. Only the frontage that is developed or will be developed with an approved building permit <br />shall be counted for purposes of determining the maximum allowable sign area; vacant <br />land reserved for future development may not be used in determining the maximum <br />allowable sign area. <br />2. The sign area may be allocated between wall signs, freestanding signs, and projecting <br />signs, provided that each sign conforms to the applicable regulations of this section. <br />3. No sign or sign area permitted on one frontage shall be transferred to another frontage <br />except in accord with a Master Sign Plan prepared pursuant to Section 4.12.120 Master <br />Sign Programs and Sign Exceptions. <br />D. Freestanding Signs. <br />1. For multi-family and nonresidential uses permitted in R districts, one freestanding sign not <br />exceeding five feet in height is permitted on a lot. <br />2. In the P district, one freestanding sign not exceeding 25 square feet in area or five feet in <br />height. <br />3. In B-TOD, C, NA, SA, DA, and I districts, one freestanding sign not exceeding 64 square feet <br />is permitted on each frontage. For large lots, a freestanding sign, not exceeding 64 square