Laserfiche WebLink
to prevent damage or accidents or injury to the public and the Contractor’s employees. The <br />Contractor shall also furnish such flagmen as are necessary to give adequate warning to <br />traffic or to the public of any dangerous conditions to the public. All flagg ing costs shall <br />be born solely by the Contractor. <br /> <br />(e) It is the Contractor’s responsibility to provide for the safety of traffic and the public. This <br />includes responsibility to inspect and identify conditions that render any portions of the <br />jobsite unsafe. The City shall be notified immediately of any unsafe conditions that requires <br />major correction. The Contractor shall be responsible for making minor corrections, <br />including, but not limited to; filling holes in turf areas and paving, using barricades or <br />traffic cones to alert the public to the existence of hazards, and replacing valve box covers. <br /> <br />(f) Pedestrian travel shall be maintained along both sides of all streets or streets where work <br />as part of this contract is being performed. All temporary pedestrian wa lkways shall be at <br />least four (4) feet wide and fully accessible to handicapped pedestrians. In all cases, <br />pedestrian walkways shall be separated from vehicular traffic by a clear area of at least six <br />(6) feet. <br /> <br />(g) Contractor shall be required to provide a list of IMSA or equivalet certified personnel <br />responsible for compliance, including copies of certifications. Costs associated with <br />recertification and training shall be borne by the Contractor. <br /> <br />(h) Depending on the nature of the work, and the extent of work that impedes the public <br />roadway, the Contractor may be requested to submit a traffic control plan for review and <br />approval by the City. <br /> <br />903 Fuel Conservation and Low Emission Equipment <br /> <br />(a) The Contractor shall implement strategies in work operations to reduce fossil fuel <br />consumption and emissions such as: use hand powered equipment when possible; <br />minimize use of gas-powered blowers; select the smallest, most fuel-efficient equipment <br />to accomplish the work; consider vehicles that operate on natural gas or biodiesel; maintain <br />equipment properly and keep it well-tuned; and emphasize employee carpooling to <br />jobsites. All blowers shall be 4-stroke to help reduce noise complaints. <br /> <br />(b) Contractor shall be responsible for laws governing the use of gas-powered motors/engines, <br />and must at their own cost, purchase and deploy new non-gas-powered equipment per the <br />guidelines and deadlines in the law. <br /> <br />904 Use Local Products and Supplies <br /> <br />(a) The Contractor shall use local products and suppliers to the extent possible. <br /> <br />905 Equipment Refueling and Repair <br /> <br />(a) The Contractor shall refuel in a safe manner to protect against accidental spills. Limit <br />refueling to specific and limited areas on a site. Measures shall be taken to preve nt, control, <br />and clean-up spills. Clean-ups shall be immediate, automatic and routine and performed by <br />Exhibit A <br />Page 54 of 55 <br />DocuSign Envelope ID: FBE0D324-5B4D-413D-B3D7-9F9F4584939A