Complete_with_DocuSign_San_Leandro_and_Waste

Home

City of San Leandro Solid Waste Post Collection Services 35 e. Traffic Control and Direction Procedures for: i. Constructing and maintaining roads from the facility entrance to scale house, and to point of unloading ii. Directing on-site traffic to appropriate unloading areas to provide a safe working environment for facility, users, visitors, and employees iii. Providing and maintaining roadways, signs, and personnel to facilitate safe and efficient traffic flow iv. Providing for a turnaround time of no more than 20 minutes from entry to exit of the facility by City-directed vehicles WMAC works to minimize wait times and maximize turn-around times for all customers at the Davis Street Facility. Pursuant to 14 CCR, Section 17418.3, traffic flow through DSTS is controlled to prevent interference with and/or creation of a safety hazard on adjacent public streets and roads, or create on-site safety hazards and/or interference with waste handling operations. Public traffic accesses the site via Davis Street and traffic lanes into the site and to the scale house are designed to accommodate vehicle flow, thus preventing vehicle stacking on nearby roads. There is one outbound scale and five inbound scales at the Main Scale House. In the event traffic does begin to extend onto the public street, traffic directors are utilized to ensure that traffic is distributed fully across all inbound lanes. Transfer trucks use Business Center Drive to access. Traffic flow through the facility shall be controlled to prevent the following: • Interference with or creation of a safety hazard on adjacent public streets or roads, • On-site safety hazards, and • Interference with operations. Traffic is controlled by facility signage and traffic directors located throughout the facility. f. Scale Operation Procedures for complying with the requirements of draft Agreement Section 5.2.8 including: i. Maintaining motor vehicles scales and associated equipment and software DSTS maintains its State-certified motor vehicle scales and associated equipment and software in accordance with Applicable Law and company policy. Scales are routinely inspected and cleaned to remove any debris. Monthly inspections check for cracks in the metal or cement, as well as any shifting of the scale(s). Scale house cameras are also inspected weekly to ensure their functionality. Routine system software maintenance is regularly updated in the POS gate house workstations. Docusign Envelope ID: C78C62DE-8589-496F-8F5A-DEC38EE5853C