5C Consent - Laserfiche WebLink

Home

DESIGN AND PERFORMANCE PROVISIONS © 2025 Fischer Compliance, LLC. All rights reserved. Sewer System Management Plan licensed for San Leandro use only. Page 34 of 57 5. Design and Performance Provisions 5.1. Updated Design Criteria/Construction Standards/Specifications WDR REQUIREMENTS Attachment D-5.1 (pg. D-5) “Updated design criteria, and construction standards and specifications, for the construction, installation, repair, and rehabilitation of existing and proposed system infrastructure components, including but not limited to pipelines, pump stations, and other system appurtenances. If existing design criteria and construction standards are deficient to address the necessary component-specific hydraulic capacity as specified in section 8 (System Evaluation, Capacity Assurance and Capital Improvements) of this Attachment, the procedures must include component-specific evaluation of the design criteria.” COMPLIANCE The City’s Municipal Code, Section 7-1-925 states that all improvements “shall conform to generally acceptable engineering standards and to City of San Leandro Subdivision Improvement Standards.” The City’s Subdivision Improvement Design Standards include specific criteria for the design of sanitary sewers and state that the City’s Standard Plans for sanitary sewers shall be utilized. These standard specifications are a comprehensive set of standards that cover all sewage or wastewater facilities in the City. The standard specifications are available to contractors and the general public at no charge and are updated periodically, as necessary. A copy is also available from the City’s website. Permits are required prior to construction of any private sewage disposal system. A permit is also required prior to constructing a building or lateral sewer or connecting to a public sewer. The permit application includes a review of plans and specifications by the City. Construction permits require construction of building sewers be in accordance with county and city requirements and be inspected by an Engineering Inspector prior to acceptance by the City. The Standard Plans give design details for sanitary sewer connections, manholes, and sewer crossings. It does not include standards for pipelines or pump stations. This is because there are too variables to consider; each pipeline or pump station design must be site-specific. Instead, the Engineering Department works with the developer’s designer to determine the appropriate design for the particular location that the pipeline or pump station will be installed. EFFECTIVENESS The City utilizes the following Key Performance Indicators for measuring effectiveness of this Element: • Are plan checking QA/QC processes helping to ensure adherence to the standards? IMPLEMENTATION PLAN/SCHEDULE No. Plan Schedule Responsible Party Mgr. Eng Sup 5.1.1 Ensure all project plans are approved in accordance with the City’s Standard Specifications and Details. Each Project X