Reso 2005-020 - Laserfiche WebLink

Home

SECTION 3.0 MITIGATION SUI~~IlVIARY AND MONITORING AND REPORTING PLAN The following is a summary of mitigation measures integrated into the Project that are adequate to reduce all potentially significant impacts to ales-than-significant level. These are the same exact mitigations measures presented in Section 2.0, above. Following each measure is a table that presents the mitigation monitoring and reporting steps that the City will implement to ensure mitigation compliance. 3.1 AESTHETICS No mitigation measures required or recommended. 3.2 AGRICULTURAL RESOURCES No mitigation measures required or recommended. 3.3 AIR QUALITY Measure AQ-1: Prior to issuance of grading permits, the construction contractor shall submit to the City Engineer a dust abatement program, which shall include the following elements: ^ Water all active construction areas at least twice daily, depending on type of operation, and wind exposure; ^ Designate a person or persons to oversee the implementation of a comprehensive dust control program and to increase watering, as necessary; ^ Construction grading activity should be discontinued in high wind conditions that cause excessive neighborhood dust problems, based on the discretion of the construction inspector; ^ Cover all trucks hauling soil, sand, and other loose materials, or require all trucks to maintain at least two feet of freeboard (i.e., the minimum required space between the top of the load and the top of the trailer) in accordance with Section 23114 of the California Vehicle Code during transit to and from the site; ^ Apply non-toxic soil stabilizers (e.g., latex acrylic copolymer) if visible soil material is carried onto adjacent public streets; and ^ Incorporate Storm Water Best Management Practices throughout the course of the Project. San Leandro Recycled Water Project 3-1 ESA / 203193 IS/MND