My WebLink
|
Help
|
About
|
Sign Out
Home
Ord 2010-019
CityHall
>
City Clerk
>
City Council
>
Ordinances
>
2010
>
Ord 2010-019
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/22/2010 9:22:31 AM
Creation date
11/22/2010 9:22:31 AM
Metadata
Fields
Template:
CM City Clerk-City Council
CM City Clerk-City Council - Document Type
Ordinance
Document Date (6)
11/15/2010
Retention
PERM
Document Relationships
3B Public Hearing 2010 1115
(Reference)
Path:
\City Clerk\City Council\Agenda Packets\2010\Packet 2010 1115
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
6
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Sections 102.0 — 102.3.2 of the Uniform Plumbing Code are hereby deleted. Enforcement and <br /> abatement procedures set forth in Articles 11, 12, and 13 of this Chapter shall apply to this <br /> Article. <br /> Section 7 -5 -910 Minimum Number of Required Fixtures and Separate Facilities <br /> A. Section 412.1 of the 2010 California Plumbing Code is amended to read: <br /> 412.1 Fixture Count. Plumbing fixtures shall be provided according to Chapter 29 of <br /> the 2010 California Building Code. The use of Table 4 -1 in the 2010 California Plumbing <br /> Code is recommended but not mandatory. Provisions of the California Plumbing Code <br /> shall govern where applicable. <br /> B. Section 412.3 of the 2010 California Plumbing Code is amended to read: <br /> 412.3 Separate Facilities. Separate toilet facilities shall be provided for each gender <br /> according to Chapter 29 of the 2010 California Building Code. Provisions of the <br /> California Plumbing Code shall govern where applicable. <br /> Section 7 -5 -915: MATERIALS. <br /> A. Section 316.3.1 of the Uniform Plumbing Code is hereby deleted and replaced to read as <br /> follows: <br /> Fixture connections between drainage pipes and water closets, floor outlet service sinks and <br /> urinals shall be made by means of approved brass, hard lead, or iron flanges caulked or soldered; <br /> rubber compression gaskets; or screwed to the drainage pipe. The connection shall be bolted with <br /> an approved gasket, washer, or setting compound between the fixture and connection. The <br /> bottom of the flange shall be set on an approved firm base. <br /> B. Section 408.4.1 and 408.4.3 of the Uniforni Plumbing Code is hereby deleted and replaced to <br /> read as follows: <br /> Section 408.4.1 - Closet rings (closet flanges) for water closets or similar fixtures shall <br /> be of an approved type and shall be bronze, copper, hard lead, cast iron, galvanized <br /> malleable iron, or other approved materials. Each such closet ring (closet flange) shall be <br /> approximately seven (7) inches (175 mm) in diameter and, when installed, shall, together <br /> with the soil pipe, present a one and one -half (1 -1/2) inch (38 mm) wide flange or face to <br /> receive the fixture gasket or closet seal. <br /> Section 408.4.3 - Closet rings (closet flanges) shall be burned or soldered to lead bends <br /> or stubs, shall be caulked to cast -iron soil pipe, and shall be screwed or fastened in an <br /> approved manner to other materials. <br /> C. Section 701.1.2 of the Uniform Plumbing Code — Materials for Drainage Piping - is hereby <br /> deleted and replaced to read as follows: <br /> ORDINANCE NO. 2010-019 2 <br />
The URL can be used to link to this page
Your browser does not support the video tag.