Ord 2013-018 - Laserfiche WebLink

Home

5. To remove Class I or Class II liquids from an underground storage tank used for fueling motor vehicles by any means other than the approved, stationary on-site pumps normally used for dispensing purposes. 6. To operate tank vehicles, equipment, tanks, plants, terminals, wells, fuel- dispensing stations, refineries, distilleries and similar facilities where flammable and combustible liquids are produced, processed, transported, stored, dispensed or used. 7. To place temporarily out of service (for more than 90 days) an underground, protected above-ground or above-ground flammable or combustible liquid tank. 8. To change the type of contents stored in a flammable or combustible liquid tank to a material which poses a greater hazard than that for which the tank was designed and constructed. 9. To manufacture, process, blend or refine flammable or combustible liquids. 10. To engage in the dispensing of liquid fuels into the fuel tanks of motor vehicles at commercial, industrial, governmental or manufacturing establishments. 11. To utilize a site for the dispensing of liquid fuels from tank vehicles into the fuel tanks of motor vehicles at commercial, industrial, governmental or manufacturing establishments. 105.6.17 Floor finishing. An operational permit or approval is required for floor finishing or surfacing operations exceeding 350 square feet (33 m2) using Class I or Class II liquids. 105.6.18 Fruit and crop ripening. An operational permit or approval is required to operate a fruit-, or crop-ripening facility or conduct a fruit-ripening process using ethylene gas. 105.6.19 Fumigation and thermal insecticidal fogging. An operational permit or approval is required to operate a business of fumigation or thermal insecticidal fogging and to maintain a room, vault or chamber in which a toxic or flammable fumigant is used. 105.6.20 Hazardous materials. An operational permit or approval is required to store, transport on site, dispense,