Laserfiche WebLink
SPECIFIC MEASUREMENT AND VERIFICATION PLAN <br />"OPTION A" <br />FOR HVAC SYSTEMS INSTALLATION <br />Introduction <br />This Measurement and Verification Plan (M&V) is specific to the installation of new high efficiency HVAC units and <br />chiller at the sites listed in the Table of Recommended Measures located at the beginning of this Attachment. <br />M&V Protocol <br />For this FEM, IPMVP Protocol — Option A shall be utilized. This option shall provide for the measurement of at <br />least one variable pre and post retrofit with other variables allowed for stipulation. For this retrofit, field data shall be <br />collected which includes, unit counts, unit tonnage, nameplate horsepower and efficiency rating for each existing <br />HVAC system. <br />Stipulated Values <br />Hours of Operation, heating/cooling loads and runtime hours of the existing HVAC systems are stipulated for <br />purposes of M & V. Please refer to Attachment C, HVAC Standards of Operation in this agreement for specific <br />operating hours and runtime hours for each HVAC unit or area. Stipulated values are agreed to by Purchaser. <br />Calculations <br />The calculations for the baseline energy consumption and post -retrofit savings provide the basis for the overall <br />financial viability of these FEM's. The following equations summarize the calculation of savings: <br />Electric (kWh) Savings <br />The electrical usage reduction of this FEM is determined by the following equation: <br />((Size of Existing HVAC Unit) x (Unit Efficiency) x (Stipulated Load Factor) - (Size of New Cooling Unit) x <br />(Unit Efficiency) x (Stipulated Load Factor)) x (Annual Operating Hours) = kWh Savings <br />Dollar Savings <br />After calculating the kWh saved, the specific facility's average cost per kilowatt hour shall be used to determine <br />dollar savings. <br />(kWh saved) x (average kWh rate) = $ kWh saved <br />($ kWh saved) = Total dollars saved <br />Operational Savings <br />The Purchaser will realize maintenance and operational savings resulting from the new system installations, <br />extended warranties, and/or service agreements provided by Climatec LLC. The operational savings are agreed to <br />be met upon the completed installation of the energy retrofit contract. <br />Pre Retrofit Measurements <br />None required for this FEM. <br />Post Retrofit Measurements <br />None required for this FEM. <br />Adjustments <br />None required for this FEM. <br />Attachment A <br />*CLIMATEC' Page 10 of 13 <br />MFRGING BUIL-DINGO & TFC.HNQL_LK!v <br />