Laserfiche WebLink
<br />Exhibit A – Page 41 of 42 <br />L. Carpet Deep Cleaning – Carpet cleaning shall be accomplished by using a Hot Water Extraction (Steam <br />Cleaning) system. Equipment shall be truck mount unless otherwise approved by the City’s Buildings <br />Supervisor. Operate the floor wand or self-contained extractor by engaging the solution valve or button and <br />pulling or pushing the equipment for approximately 3 to 5 feet (or at a comfortable distance). Release the <br />solution valve before reaching the end of your pass to assure that you vacuum up all of the solution. Cover the <br />same area two or three times with the solution valve off to remove as much moisture from the carpet as <br />possible. Overlap approximately 2 inches into the area already cleaned and proceed as described above. In <br />extremely soiled areas, it may be necessary to make two or three additional passes with the solution valve on. <br />Make several additional passes with the solution valve off to remove as much moisture from the area as <br />possible, always being careful not to over-wet the carpet. Place drying fans on wet areas during cleaning and <br />allow the carpet to dry as thoroughly as possible. <br /> <br />Bonnet cleaning of any facility carpet shall NOT be allowed under this contract. <br /> <br /> <br /> <br />94