Laserfiche WebLink
<br />Consulting Services Agreement between City of San Leandro and Last revised [01/09/2018] Noll & Tam Architects for Design of Mulford Marina Library Exhibit A – Page 8 of 8 <br />EXHIBIT A-2 DETAILS OF DELIVERABLES The City of San Leandro has a standard title block and standard size sheet (22”x34”). The contractor shall use both for all sheets of the plans. Drawings and technical specifications shall be clear, complete, and buildable. All information required to build the project shall be shown. If required information is not shown in the details, then the location of said information shall be clearly noted. Details, plans, elevations, etc. shall be arranged and numbered on the sheets in a regular consistent pattern. All drawings will be produced in AutoCad latest version. All xref drawings, pen-setting files, attached images, fonts, and other files associated with the AutoCAD files shall also be sent to the City to allow for accurate plotting of the drawings. All plans shall be drafted in accordance with Consultant’s CAD standards. Text shall not be written over lines or other text. Existing items/work/features shall be clearly labeled as such. Text shall plot at 3/32” tall minimum. Details shall not be called as similar unless the actual detail clearly notes what occurs at the similar location. Details shall be cut with the proper orientation. Details with reverse orientation shall be noted as OH (opposite hand) on the drawings. Words shall be completely spelled out unless an abbreviation is defined on the drawings. Standard plans that are referenced on this project shall be included on the plan sheets of the construction documents. Details will be provided in .tif format, they shall be inserted into electronic files and printed without changes. Dimensions shall be buildable. Concrete shall not be dimensioned tighter than ½” in plan and ¼” vertical. Structural wood including all stud walls shall not be dimensioned tighter than ¼”. Structural steel shall not be dimensioned tighter than 1/8”. Finish work excepted. Items to be prefabricated shall be so noted on plans. Plans shall differentiate between field welding and shop welding. Specifications shall be written and printed with times new roman font at 11 point minimum. Specifications shall be edited such that only materials, procedures, and execution specific to this project are included. Specifications shall be Submitted in PDF and MS Word. Per the Public Contract Code, the specifications shall not call for a designated material, product, thing, or service by specific brand or trade name unless the specification is followed by the words "or equal" so that bidders may furnish any equal material, product, thing, or service. Cost estimates shall be submitted in PDF format. Cost estimates shall break down the scope of work in sufficient detail to allow City staff to verify the cost of the individual work items.