Laserfiche WebLink
<br /> <br /> <br />Northeast LLC – <br />Phone: 916-996-3503 <br /> Email: Patrick @efferusa.com <br />May 20, 2020 <br />UPDATED SPECIFICATIONS FOR <br />CITY OF SAN LEANDRO <br /> <br /> We are pleased to propose the following equipment for your consideration. <br /> <br />EFFER® MODEL 175/5S ARTICULATING CRANE: <br />• Crane mounted behind the rear wheels. <br />• Effer crane with capacity of 1,695 lbs. @ 47’10” horizontal, see load chart for details. <br />• Danfoss, proportional compensated, four section multi- function controlbank. <br />• Self-supported single stage extensions cylinders with sequence valves, end stroke shock <br />absorbers, and HSS (High Speed System), regenerating valve. <br />• Scanreco radio remote controller and with additional battery and charger. Charger <br />mounted inside truck cab within easy reach of the operator. <br />• Effer DMU 3000 overload safety device with ESS Effer Stability System <br />• Rotation by rack and pinion 400 degrees <br />• Exclusive ETL (Effer Twin Links) double link-rod system. With 14˚ EXTRA LIFT system <br />device on the fly jib <br />• Fabricated, welded crane base pedestal. <br />• Hydraulic out and hydraulic down crane based stabilizers with manual swing up device, <br />with minimum of 235” spread, and ball joint adaptors. Supplementary stabilizer installed <br />under the bed, behind the truck cabin. <br />• Thermostatically controlled oil cooler, mounted in the crane space. <br />• Effer oil reservoir 21 gallons mounted in the crane space <br />• Hydraulic valve bank configured for a variable displacement pump. <br />• Holding valves directly flanged to cylinder barrels. <br />• 8.0 Ton Load hook. <br />• ANSI safety decals, USA Load charts. <br />• Painted with two stage paint Effer yellow. <br />• Design according to UNI EN 12999 HC1 S1 regulations. <br /> <br />INSTALLATION, AND BODY SPECIFICATIONS: <br /> <br />• Install Effer model 175/5S according to manufacturer installation procedures, behind the <br />rear axle. <br />• Full length all steel subframe to connect crane to supplementary stabilizers. <br />• All steel 132” long x 96” wide flatbed body. Painted high gloss black. <br />• All steel approximately 58” tall cab protector, with steel mesh cut out for rear window. <br />• Rear crane protection wall in front of the crane, approximately 24” tall. Shall be <br />removable bolt on style. <br />752