Laserfiche WebLink
mechanical/electric valve with a single pull control located at the pump operator's panel area. <br />100266.2 - FIRE PUMP ENCLOSURE <br />The fire pump house shall be installed around the pump and engine. The enclosure shall be fabricated of .125" aluminum <br />tread plate. Hinged doors and access panels shall be installed for servicing of the engine. <br />An engine and pump control panel shall be provided at the rear of the vehicle. The following shall be located at the <br />operator's position: <br />2.5" discharge pressure gauge <br />start/stop control <br />throttle control <br />low oil pressure warning light <br />tachometer <br />The pump control panel shall be mounted on pump enclosure. <br />100419.1 - SECONDARY PUMP CONTROLS <br />The cab shall be equipped with a secondary pump instrument control panel in the cab. This panel shall include the following: <br />1. On-off start switch <br />2. Oil and temperature alarm <br />3. Running indicator light - green <br />4. Pressure gauge <br />5. Manual vernier throttle <br />100534.2 - LOW WATER PRESSURE CUT-OFF <br />There shall be a low water pressure cut-off switch that will shut off the pump engine when pump pressure is lost. There shall <br />be a manual override switch to bypass the cut-off. <br />LOW PRESSURE SWITCH SHALL BE A MOMENTARY TOGGLE <br />100267.1 - FUEL SYSTEM TO DIESEL FUEL TANK <br />The fuel system for the auxiliary fire pump shall be plumbed to the chassis fuel system. There shall be a separate fuel pickup <br />tube mounted in the chassis fuel tank specifically for a separate engine driven pump assembly. <br />There shall be an electric fuel pump with spin on fuel filter and flexible fuel hose furnished between the chassis fuel tank and <br />the auxiliary pump. <br />100256.2 - ELECTRIC START WIRING TO CHASSIS <br />The 12 volt positive and negative cables shall be provided from the chassis battery to the fire pump area. The cables shall <br />have a circuit breaker installed at the chassis battery. <br />THE FIRE PUMP WILL HAVE LIVE PUMP WIRING, TO ALLOW THE FIRE PUMP TO OPERATE WHEN THE CHASSIS IS TURNED OFF. <br />100254.1 - PUMP ENGINE OIL DRAIN <br />The fire pump engine shall have an oil drain line installed. It shall allow for easy oil draining. <br />100255.2 - AUXILIARY FIRE PUMP MOUNTING PROVISIONS <br />The auxiliary fire pump shall be installed at the center rear of the body. The sub-structure shall have welded in mounting <br />sub-plates between the structural members. <br />MATCH 14333 <br />100273.1 - FRONT BUMPER MANIFOLD SUPPLY <br />There shall be an 1.5" stainless steel valve, with a flexible supply hose installed to feed the front discharge manifold. <br />100270.2 - 2-1/2" GATED INTAKE -- REAR <br />Skeeter Brush Trucks Page 7 12/03/2020132