Laserfiche WebLink
One (1) 2-1/2" gated suction intake shall be installed on rear area to supply the fire pump from an external water supply. <br />The valve shall be a controlled with a direct quarter-turn ball valve control handle and shall have 2-1/2" NH female thread <br />with removable screen with plug. <br />100283.1 - TANK TO PUMP LINE INSTALLATION <br />The 2.5" tank to pump line shall be installed with a flexible hump hose connection and stainless steel clamps to the water <br />tank. The valve shall be controlled with a manually operated handle directly on the valve. <br />100281.2 - WATER TANK FILL AND COOLING LINE <br />One (1) 1" fire pump to water tank refill and bypass cooler line shall be provided. The pump to tank valve shall be a 1" full <br />flow quarter turn ball valve with local control handle. A 1" flex hose shall be installed to the water tank. <br />100278.2 - 3/4" GARDEN HOSE DISCHARGE -- REAR <br />One (1) .75" garden hose discharge shall be installed on the rear pump area, controlled by a quarter turn ball valve with <br />local control handle. The discharge shall have a .75" male garden hose threads and cap. <br />100274.2 - 2-1/2" DISCHARGE -- REAR <br />One (1) 2-1/2" discharge shall be installed at the rear pump area, controlled by a quarter turn ball valve. The discharge shall <br />have 2-1/2" NH male hose threads. The discharge shall be equipped with 2-1/2" female x 1-1/2" chrome plated brass <br />reducer, 1-1/2" chrome cap and chain. <br />100441.1 - FRONT OF BODY DISCHARGE (THROUGH THE TANK) <br />A 1.5" discharge shall be piped from the rear pump area to the front on the body. A 1.5" master control valve shall be <br />installed at the rear pump manifold area with direct control handle. <br />203717.2 - 2 1/2" NST 30 DEGREE ELBOW <br />There shall be one (1) 30 degree 2 1/2" NST elbow supplied. <br />100290.4 - HOSE REELS (2) <br />Two (2) Hannay aluminum hose reels shall be installed. The reels shall have leak proof ball bearing swing joints, adjustable <br />friction brakes, electric 12 volt rewind and manual crank rewind provisions. The reels shall be plumbed with wire reinforced, <br />high-pressure hose coupled with brass fittings. The reels shall be designed to hold 125% of the specified hose capacity. <br />The reels shall be installed at the front outside corners of the body, above the transverse compartment, facing outward, one <br />(1) each side. Control valves for the reels shall be located at the reels. <br />REELS TO HAVE NPSH THREADS <br />100293.2 - REEL CAPACITY (Qty: 2) <br />Each hose reel shall have a capacity of 100 feet of hose. <br />100295.5 - HOSE REEL DISCHARGES (2) (Qty: 2) <br />Two (2) 3/4" discharges shall be piped from the fire pump to the hose reels with flexible high pressure hose. The quarter turn <br />ball valves shall be controlled on the manifold. <br />100302.4 - NOZZLE MOUNT (Qty: 2) <br />There shall be an aluminum angle bracket installed at each hose reel on the hand rail in place of a nozzle holder. <br />100297.6 - HOSE REEL HOSES (Qty: 2) <br />One (1) 100' foot length of 3/4" water hose shall be installed on each hose reel. The hose shall be equipped with NPSH <br />threaded couplings and have a 300 PSI working pressure. <br />100280.4 - GROUND SWEEP DISCHARGES -- FRONT BUMPER <br />One (1) 1.5" front bumper ground sweep discharge piping shall be piped to the front bumper area. The discharge shall be <br />controlled by an 1.5" manual override valve at the rear pump area. Flexible 1.5" diameter high pressure hose shall be <br />provided from the pump to the sweep nozzles with low point drains where necessary. <br />Two (2) ground sweep discharge nozzles shall be installed, one each side of the front bumper. Each nozzle shall have an 1" <br />Skeeter Brush Trucks Page 8 12/03/2020133