Laserfiche WebLink
100070.1 - NO BUMPER GROUND LIGHTS <br />There shall be no under bumper ground lights installed. <br />200312.2 - GROUND LIGHTS, CAB, 2 DOOR, LED STRIPS <br />Two (2) LED ground strip lights shall be installed under the cab step area in compliance with NFPA standards, one (1) on <br />each side of the apparatus, wired to the Cencom. <br />100182.5 - GROUND LIGHTS - UNDER REAR STEP <br />Two (2) Grote #63871 LED ground lights shall be installed under the rear step area, one on each side of the apparatus. <br />100184.3 - WORK LIGHTS <br />Four (4) Grote #63871 LED step lights with clear lens shall be installed, wired to switch on the Cencom. Location shall be: in <br />each corner of the protective tubing assembly to light the pump panel and the front body walkway area. <br />100318.3 - FRONT BUMPER SCENE LIGHTS <br />A Rigid Manufacturing E series 12031 20" spot/flood light shall be installed. The LED scene lights shall incorporate clear <br />LED's with a clear optic polycarbonate lens for maximum illumination. <br />Location shall be: ON THE FWD FACE OF THE BUMPER, AT THE TOP CORNER. SEE PICTURE <br />100322.1 - SCENE LIGHTS <br />Six (6) Rigid Manufacturing Dually 20211 scene lights shall be installed. The LED scene lights shall incorporate clear LEDs <br />with a clear optic polycarbonate lens for maximum illumination. <br />Location shall be: Two (2) outward facing, each side of body, two (2) rear facing. <br />100100.3 - RADIO INSTALLATION <br />There shall be two (2) fire radio holes installed in the center console for department radios. The exact layout and dimensions <br />shall be determined at the pre-construct conference. <br />There shall be two (2) radio antennas installed at the direction of the department. <br />APX EXCITE WIRE TO BE WIRED HOT <br />100324.1 - BACK-UP ALARM <br />One (1) Buyers #BA107 back up alarm shall be installed. <br />203773.3 - ELECTRONIC SIREN <br />One (1) Whelen, Model #CCSRNT4G CenCom Carbide siren with auxiliary switches with noise canceling microphone shall be <br />provided. Siren head will be mounted on the center console in easy reach of the driver. <br />SLIDE 3 TO ACTIVATE WAIL <br />HORN RING FUNCTION TO ACTIVATE YELP <br />ADD PARK KILL FUNCTION <br />100313.1 - SIREN SPEAKER <br />One (1) Whelen Model #SA315P Projector Series siren speaker shall be provided with bracket. The 100 watt siren speaker <br />shall be designed in a black nylon composite housing with 123 decibel rating. <br />Location shall be: Behind the front bumper. <br />100310.2 - MOUNTING OF LIGHT BAR WITH PROTECTIVE GUARD <br />The lightbar shall be mounted on the headache rack shelf with an aluminum brush guard protective assembly. <br />100309.3 - LIGHTBAR <br />A Whelen Legacy low profile Super-LED NFPA lightbar shall be installed. The 54" lightbar shall be designed to meet the <br />Skeeter Brush Trucks Page 16 12/03/2020141