Laserfiche WebLink
Page 5 of 16 <br /> <br />5451 Chavenelle Road, Dubuque, Iowa 52002 ◼ [O] 563.585.0967 ◼ www.unisonsolutions.com <br />Design and content included in this document is proprietary and remains the property of Unison Solutions, Inc. <br />- Vessel equipped with a 30” side manway <br />- Internal supports and grating for media <br />- Pressure/Vacuum relief valve included <br />- Two top vents with stainless steel ball valves <br />- Bottom manual condensate drain with stainless steel ball valves <br />- 4” Inlet and outlet spool pipes and valves provided. <br /> <br />- Work Platform and Ladder <br /> <br />- Work platform shall be welded carbon steel construction with satin black <br />powder coat finish <br />- Ladder shall be aluminum construction <br /> <br />- Initial Charge of H2S Removal Media <br /> <br />- The initial charge of H2S Removal media for each Hydrogen Sulfide Removal <br />Media Vessel will be provided. <br />- H2S Removal to be loaded into Hydrogen Sulfide Removal Vessels by <br />INSTALLATION CONTRACTOR <br />- Initial charge of media consists of 8, 2,200-pound super sacks of media per <br />vessel for a total of 17,600 pounds of media <br /> <br />GAS COMPRESSION/MOISTURE REMOVAL SYSTEM <br /> <br />- Gas Compressor Inlet Moisture/Particulate Filter <br /> <br />- Mounted upstream of the Gas Compressor <br />- 99% removal of 3micron and larger particulates and liquid droplets <br />- Materials of construction shall be 304L stainless steel <br />- 150# ANSI B16.5 side inlet and outlet connections <br />- Cleanable polypropylene structured mesh element <br />- Differential pressure gauge across the filter element <br />- Sight glass for liquid level indication <br />- Level switches above the condensate drain to warn of failure <br />- Bottom drain with strainer, condensate pump, check valve, manual bypass and <br />piping <br /> <br />- Pre-cooler <br /> <br />- Within the heat exchanger the gas will be cooled to 50°F <br />- Gas to Glycol fin/tube core <br />- Materials of construction shall be aluminum fins on 304L stainless steel tubes <br />for the core, mounted in a 304L stainless steel housing <br />- 150# ANSI B16.5 inlet and outlet connections <br /> <br />- Gas Compressor <br /> <br />- One Oil Flooded Twin Screw Compressor <br />DocuSign Envelope ID: 1DDC1773-ED91-404B-97DD-AC3EFDBAD0DD