Laserfiche WebLink
Page 6 of 16 <br /> <br />5451 Chavenelle Road, Dubuque, Iowa 52002 ◼ [O] 563.585.0967 ◼ www.unisonsolutions.com <br />Design and content included in this document is proprietary and remains the property of Unison Solutions, Inc. <br />- Direct drive 75Hp, 480V/3Ph/60Hz electric motor <br />- All gas and oil components other than the compressor head shall be <br />constructed of stainless steel and/or aluminum. <br />- Gas inlet and discharge flex connectors <br />- Gas inlet check valve <br />- Discharge pressure safety valve <br />- Oil handling system will include an oil handling reservoir, coalescing filter, <br />pressure safety valve, oil cooler, three-way thermal bypass valve and an oil <br />particulate filter. <br />- Initial fill of oil for the Gas Compressor system will be provided <br /> <br />- Oil/Gas Separator <br /> <br />- ASME Section VIII, Division 1 code stamped <br />- Materials of construction shall be 304L stainless steel <br />- ANSI B16.5 inlet and outlet connections <br />- Discharge check valve <br /> <br />- Oil Cooler <br /> <br />- Air to oil fin/tube core <br />- Materials of construction shall be aluminum fins and tubes <br />- Flange connections <br />- 480V/3Ph/60Hz EXP electric motor <br /> <br />- Oil Particulate Filter <br /> <br />- ASME Section VIII, Division 1 code stamped <br />- Materials of construction shall be 304L stainless steel <br />- 150# ANSI B16.5 inlet and outlet connections <br />- Replaceable element <br /> <br />- Gas to Gas Heat Exchanger <br /> <br />- Plate and frame type heat exchanger <br />- Materials of construction shall be 316L stainless steel plates with Viton gaskets <br />- ANSI B16.5 inlet and outlet connections <br /> <br />- Gas to Glycol Heat Exchanger <br /> <br />- Plate and frame type heat exchanger <br />- Materials of construction shall be 316L stainless steel plates with Viton gaskets <br />- ANSI B16.5 inlet and outlet connections <br /> <br />- Moisture Separator <br /> <br />- Uni-Flow Model <br />- ASME Section VIII, Division 1 code stamped <br />DocuSign Envelope ID: 1DDC1773-ED91-404B-97DD-AC3EFDBAD0DD