Reso 2022-085 Approving Third Addendum and Planning Entitlements

Home

166. The Applicant/Developer shall construct all public facilities in accordance with the current Americans with Disabilities Act (ADA), including driveways and curb ramps. Sidewalk accessibility is subjectto the Accessibility Guidelines for Pedestrian Facilities in the Public Right -of -Way (PROWAG); see https://www.access-board.gov/guidelines-and-standards/streets-sidewalks/public-rights-of- way/proposed-rights-of-way-guidelines. 167. The Applicant/Developer shall show construction details for all pedestrian paths and trails on the Improvement Plans, Grading Plans and Final Landscape Plans. Trail crossings of streets shall have curb cuts, ramps, signs, and pavement markings as approved by Engineering & Transportation Department and Planning Division. 168. The Applicant/Developer shall note, minor lot line adjustments may be made based on final construction plans, subject to approval by the City and Applicant/Developer. CONSTRUCTION ACTIVITIES 169. The Applicant/Developer shall contact the Engineering & Transportation Department to arrange for a Pre -Construction meeting prior to issuance of Grading or Building Permits, whichever comes first. 170. The project design engineer shall be responsible for the project plans. If plan deviations are necessary, the project design engineer must first prepare a revised plan or details of the proposed change for review by the Engineering & Transportation Department. Changes shall be made in the field only after approval by the City Engineer. At the completion of the project, the project design engineer shall prepare and submit a signed "As -built" plans. 171. Construction inspections shall be coordinated with the Engineering & Transportation Department and Building Division and no construction shall deviate from the approved plans without City approval. 172. Prior to issuance of permits for demolition of the project site buildings, an asbestos and lead -based paint survey shall be performed. If asbestos -containing materials are determined to be present, the materials shall be abated by a certified asbestos abatement contractor in accordance with the regulations and notification requirements of the Bay Area Air Quality Management District. If lead - based paints are identified, then federal and State construction worker health and safety regulations shall be followed during demolition activities. If loose or peeling lead -based paint are identified, they shall be removed by a qualified lead abatement contractor and disposed of in accordance with existing hazardous waste regulations. 173. The Applicant/Developer shall implement a dust control plan. Submit the plan to Engineering & Transportation Department for review and approval prior to issuance of a Grading Permit. 174. The Applicant/Developer shall implement the following measures during construction: a. Gather all construction debris on a regular basis and place them in a dumpster or other container that is emptied or removed on an as -needed basis to avoid overflow of debris. When appropriate, use tarps on the ground to collect fallen debris or splatters that could contribute to storm water pollution. Recommended Conditions of Approval June 21, 2022 PLN22-0008, PLN21-0020 & PLN21-0021 Page 30 of 39