Laserfiche WebLink
moved at a frequency which avoids excessive wear <br />and promotes turf cover in irrigated areas. <br />2.12.2 Care and maintenance of all aprons, collars, and <br />greens approaches must be identical to all of the <br />specifications as set forth in Section 2.12.1 for putting <br />greens. These areas of the course will be addressed <br />as early as possible during the business day (within <br />reason, considering worker and product safety). <br />collars and greens approaches should be cut to a <br />height between .375 and .500 inches and aprons <br />between 1.000 and 1.500 inches. <br />2.12.2.1 Care and maintenance of all Aprons, Collars, and <br />Greens Approaches must be identical to all of the <br />standards and specifications as set forth in Section <br />2.12.1 for Putting Greens with the following <br />exceptions: Cutting heights may be adjusted no more <br />than one hundred (100%) percent higher than that of <br />the putting surfaces at any time. Frequency of <br />mowing will be every other day with a minimum <br />frequency of three (3) times weekly. <br />2.12.2.2 Greens approaches are to be maintained utilizing all <br />standards of maintenance as outlined in Section <br />2.12.3 for Tees with the following exceptions: Greens <br />approaches are to be maintained at all times at the <br />same cutting height and under the same mowing <br />frequency as outlined for Aprons and Collars in <br />Section 2.12.2.1. Greens approaches are to be <br />22 <br />