5G Consent - Laserfiche WebLink

Home

Page 6 of 35 years from the date of written notice, b) complies with all the conditions of this Lease, and c) submits an application and obtains approval from Lessor and to the extent applicable, from the California State Lands Commission to restore the Lease Premises. 10. Lessee agrees to submit no later than 2 years prior to the expiration of this Lease either: (a) an application and minimum expense deposit for a new lease for the continued use of the Lease Premises or (b) a plan for restoration of the Lease Premises to be completed no later than the expiration of the Lease Term, pursuant to Section 3, Paragraph 13. 11. Lessee must submit all required pre-construction documents and permits as required by Section 2, Paragraphs 12, 13, and 14 for staff review and approval of a Notice to Proceed. 12. At least fifteen (15) days prior to (i) start of the Horizontal Directional Drilling (HDD) operation, and (ii) start of the marine cable laying activity, Lessee shall submit a Local Notice to Mariners to the United States Coast Guard (USCG). A copy of each published Notice shall be immediately filed by the Lessee with the Lessor. 13. At least sixty (60) days prior to the start of construction of the Project as defined in the Mitigated Negative Declaration (MND), Lessee shall provide the following for Lessor's review: a) Engineering design drawings as issued for construction, certified (stamped, signed, and dated) by a California Registered Civil/Structural Engineer, showing details of the proposed cables/conduits and associated facilities of the Project (terrestrial and marine) with key control points referenced to the California Coordinate System (CCS83) and vertical profile data with elevations referenced to Mean Lower Low Water (MLLW) datum, the North American Vertical Datum of 1988 (NAVD 88), or other applicable local vertical control datum in both plan view and profile. The drawings shall also show all existing pipelines and utilities, and design separation between them and the proposed cables/conduits in both plan view and profile. In addition, the drawings shall delineate the Lease Premises. For the proposed cable/conduit segments to be installed using the HDD method, the drawings shall provide information such as pipe grade and material specifications, minimum bend radius, and coordinates of the entry and exit points. b) A site-specific geotechnical report certified (stamped, signed, and dated) by a California registered Geotechnical Engineer, including boring logs, confirmation of the fitness of purpose of the HDD method, and any geotechnical recommendations for safe installations of HDD, cable landing vaults, and cable laying of the Project. The report should also include the