My WebLink
|
Help
|
About
|
Sign Out
Home
Impec Group NPSA 20240401
CityHall
>
City Clerk
>
City Council
>
Agreements
>
2024
>
Impec Group NPSA 20240401
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
3/22/2024 4:23:05 PM
Creation date
3/22/2024 3:55:26 PM
Metadata
Fields
Template:
CM City Clerk-City Council
CM City Clerk-City Council - Document Type
Agreement
Document Date (6)
4/1/2024
Retention
PERM
Document Relationships
5B Consent
(Amended)
Path:
\City Clerk\City Council\Agenda Packets\2024\Packet 20240304
Reso 2024-017 Janitorial Services NPSA
(Amended)
Path:
\City Clerk\City Council\Resolutions\2024
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
81
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
<br /> <br />Non-Professional Services Agreement between April 1, 2024 <br />City of San Leandro and Impec Group—Exhibit D Page 36 of 36 <br />6. Each coat of sealer or wax shall be buffed and dust -mopped thoroughly before the next coat is <br />applied. <br />7. Prior to and after the service all furniture shall be moved as necessary. <br /> <br />Note: The job shall not be considered complete until the furniture is returned to its original location. <br />1020 Exterior Windows <br />1. Clean all exterior windows and frames. (Clean all interior windows and frames are a part of and <br />included in the base pricing) <br />2. Windows shall be free of smudges, fingerprints, cobwebs, etc. <br />1030 Carpet Deep Cleaning <br />1. Carpet cleaning shall be accomplished by using a Hot Water Extraction (Steam Cleaning) system. <br />2. Equipment shall be truck mount unless otherwise approved by the City’s Buildings Supervisor. <br />3. Operate the floor wand or self-contained extractor by engaging the solution valve or button and <br />pulling or pushing the equipment for approximately 3 to 5 feet (or at a comfortable distance). <br />4. Release the solution valve before reaching the end of your pass to assure that you vacuum up all <br />the solution. <br />5. Cover the same area two or three times with the solution valve off to remove as much moisture from <br />the carpet as possible. <br />6. Overlap approximately 2 inches into the area already cleaned and proceed as described above. <br />7. In extremely soiled areas, it may be necessary to make two or three additional passes with the <br />solution valve on. <br />8. Make several additional passes with the solution valve off to remove as much moisture from the area <br />as possible, always being careful not to over-wet the carpet. <br />9. Place drying fans on wet areas during cleaning and allow the carpet to dry as thoroughly as possible. <br />10. Bonnet cleaning of any facility carpet shall NOT be allowed under this contract. <br /> <br /> <br />DocuSign Envelope ID: ED026586-45BF-457C-B317-CC6A9075C2DC
The URL can be used to link to this page
Your browser does not support the video tag.