Laserfiche WebLink
<br />EXHIBIT A-2 <br />DETAILS OF DELIVERABLES <br /> <br />The City of San Leandro has a standard title block and standard size sheet (22"x34"). <br />The contractor shall use both for all sheets of the plans. <br /> <br />Standard plans that are referenced on this project shall be included on the plan sheets of <br />the construction documents. Standard details are available in .tif format on the City web <br />site; they shall be inserted into electronic files and printed without changes. <br /> <br />Dimensions shall be buildable. Concrete shall not be dimensioned tighter than 12" in plan <br />and Y.t" vertical. Structural wood including all stud walls shall not be dimensioned tighter <br />than Y.t". Structural steel shall not be dimensioned tighter than 118". Finish work <br />excepted. <br /> <br />Details, plans, elevations, etc. shall be arranged and numbered on the sheets in a regular <br />consistent pattern. All sub-consultants shall make their work conform with the detail <br />numbering convention of the Consultant. <br /> <br />Specifications shall be written and printed with times new roman font at 11 point <br />minimum. Specifications shall be edited such that only materials, procedures, and <br />execution specific to this project are included. <br /> <br />Items to be precast or prefabricated shall be so noted on plans. Plans shall differentiate <br />between field welding and shop welding. <br /> <br />All plans shall be drafted in accordance with Consultant's CAD standards. Text shall not <br />be written over lines or other text. Existing items/work/features shall be clearly labeled <br />as such. Text shall plot at 3/32" tall minimum. Details shall not be called as similar <br />unless the actual detail clearly notes what occurs at the similar location. Details shall be <br />cut with the proper orientation. Details with reverse orientation shall be noted as OR <br />(opposite hand) on the drawings. Words shall be completely spelled out unless an <br />abbreviation is defined on the drawings. <br /> <br />Electronic file for specifications shall be provided in MSW ord format. <br /> <br />Electronic files for drawings shall be provided in AutoCad (by Autodesk) format. <br /> <br />Senior Center <br />Project No. 210-18-116 <br />COBG - Rev. 3/15/04 <br /> <br />2/6/06 <br />Page 25 of39 <br />