Laserfiche WebLink
<br />Non-Professional Services Agreement between July 19, 2021 <br />City of San Leandro and Redwood Painting Company, Inc. Exhibit A Page 7 of 24 <br />1. Minimum of 5 years experience applying specified type or types of coatings <br />under conditions similar to those of the Work: <br />a. Provide qualifications of applicator and references listing 5 similar <br />projects completed in the past 2 years. <br />2. Manufacturer approved applicator when manufacturer has approved <br />applicator program. <br />3. Approved and licensed by polymorphic polyester resin manufacturer to apply <br />polymorphic polyester resin coating system. <br />4. Approved and licensed by elastomeric polyurethane (100 percent solids) <br />manufacturer to apply 100 percent solids elastomeric polyurethane system. <br />5. Applicator of off-site application of coal tar epoxy shall have successfully <br />applied coal tar epoxy on similar surfaces in material, size, and complexity as <br />on the Project. <br /> <br />B. Regulatory requirements: Comply with governing agencies regulations by using <br />coatings that do not exceed permissible volatile organic compound limits and do <br />not contain lead: <br />1. Do not use coal tar epoxy in contact with drinking water or exposed to <br />ultraviolet radiation. <br /> <br />C. Certification: Certify that coatings are resistant to deterioration when exposed to <br />hydrogen sulfide and other sewage gases and product data designates the <br />coating as suitable for water and wastewater service. <br /> <br />D. Field samples: Prepare and coat a minimum 100 square foot area between <br />corners or limits such as control or construction joints of each system. Approved <br />field sample may be part of Work. <br /> <br />E. Pre-installation conference: One meeting required before project performance. <br /> <br />F. Compatibility of coatings: Use products by same manufacturer for prime coats, <br />intermediate coats, and finish coats on same surface, unless specified otherwise. <br /> <br />G. Services of coating manufacturers representative: Arrange for coating <br />manufacturers representative to attend pre-installation conferences. Make <br />periodic visits to the project site (minimum biweekly) to provide consultation and <br />inspection services during surface preparation and application of coatings, and to <br />make visits to coating plants to observe and approve surface preparation <br />procedures and coating application of items to be “shop primed and coated”. <br /> <br />1.07 PRODUCT DELIVERY, STORAGE, AND HANDLING <br /> <br />A. Deliver, store, and handle products as specified by manufacturer. <br />B. Remove unspecified and unapproved paints from Project site immediately. <br />DocuSign Envelope ID: BCD58F18-CC63-40CC-B673-999B5DE97062