Laserfiche WebLink
<br />Non-Professional Services Agreement between July 19, 2021 <br />City of San Leandro and Redwood Painting Company, Inc. Exhibit A Page 17 of 24 <br />7. When limitation on time between abrasive blasting and coating cannot be met <br />before attachment of components to surfaces which cannot be abrasive <br />blasted, coat components before attachment. <br /> <br />8. Ensure primer and intermediate coats of coating are unscarred and <br />completely integral at time of application of each succeeding coat. <br />9. Touch up suction spots between coats and apply additional coats where <br />required to produce finished surface of solid, even color, free of defects. <br />10. Leave no holidays. <br />11. Sand and feather in to a smooth transition and recoat and recoat scratched, <br />contaminated, or otherwise damaged coating surfaces so damages are <br />invisible to naked eye. <br /> <br />R. Concrete: <br />1. Apply first coat (primer) only when surface temperature of concrete is <br />decreasing in order to eliminate effects of off-gassing on coating. <br /> <br />3.05 ALKALI RESISTANT BITUMASTIC <br /> <br />A. Preparation: <br />1. Prepare surfaces in accordance with general preparation requirements. <br />B. Application: <br />1. Apply in accordance with general application requirements and as follows: <br />a. Apply at least 2 coats, 8 to 14 mils dry film thickness each. <br /> <br />3.06 WAX COATING <br /> <br />A. Preparation: <br />1. Prepare surfaces in accordance with general preparation requirements. <br /> <br />B. Application: <br />1. Apply in accordance with general application requirements and as follows: <br />a. Apply at least 1/32-inch thick coat with 2-inch or shorter bristle brush. <br />b. Thoroughly rub coating into metal surface with canvas covered wood <br />block or canvas glove. <br /> <br />3.07 HIGH SOLIDS EPOXY SYSTEM <br /> <br />A. Preparation: <br />1. Prepare surfaces in accordance with general preparation requirements and <br />as follows: <br />a. Abrasive blast ferrous metal surfaces to be submerged at jobsite in <br />accordance with SSPC SP-5 prior to coating. When cleaned surfaces <br />rust or discolor, abrasive blast surfaces in accordance with SSPC SP-10. <br />DocuSign Envelope ID: BCD58F18-CC63-40CC-B673-999B5DE97062