Laserfiche WebLink
6 Maintenance <br />If the hole is marked "oil in", slightly tilt the pump and lower it again in order to fill the <br />pump with the correct quantity. <br />Quantity: approximately 1.0 L (1.1 qt). <br />Refit the oil plug and tighten. <br />Tightening torque: 10-40 Nm (7.5-29.5 ft-lb). <br />6.4 Service the pump <br />6.4.1 Inspection <br />Type of <br />Purpose <br />Inspection interval <br />maintenance <br />Initial inspection <br />AXylem-authorized personnel checks the pump condition. <br />Within the firstyear of operation. <br />From the results, the personnel recommends the intervals <br />for the periodical inspection and overhaul for the <br />installation. <br />Periodical <br />The inspection prevents operational interruptions and <br />Up to every year <br />inspection <br />machine breakdowns. The measures to increase <br />Applies to normal applications and <br />performance and pump efficiency are decided for each <br />operating conditions at media <br />application. They can include such things as impeller <br />(liquid) temperatures <40°C <br />trimming, wear part control and replacement, control of <br />(104°F). <br />zinc -anodes and control of the stator. <br />Overhaul <br />The overhaul lengthens the operating lifetime of the <br />Up to every three years <br />product. It includes the replacement of key components and <br />Applies to normal applications and <br />the measures that are taken during an inspection. <br />operating conditions at media <br />(liquid) temperatures <40°C <br />(104°F). <br />NOTICE: <br />Shorter intervals may be required when the operating conditions are extreme, for <br />example with very abrasive or corrosive applications or when the liquid temperatures <br />exceed 40°C (104°F). <br />Service item <br />Action <br />Cable <br />1. If the outerjacket is damaged, then replace the cable. <br />2. Checkthat the cables do not have any sharp bends and are not <br />pinched. <br />Connection to power <br />Checkthatthe connections are properly secured. <br />Electrical cabinets <br />Check that they are clean and dry. <br />Flygt 3102 Installation, Operation, and Maintenance Manual 45 <br />