Laserfiche WebLink
<br /> <br />Non-Professional Services Agreement between <br />City of San Leandro and Silman Industries—Exhibit A Page 14 of 30 <br />b) Manufacture specification is to govern alteration of consistency. <br />Stripe Coat: <br />a) All stripe coat, will be unthinned and worked in by brush to achieve a contiguous film over all edges, <br />corners, bolts, nuts, threads, rivets, and weld seams, extending at least 1 in. onto adjacent steel. <br />b) Stripe Coat shall be applied to crevices, nut and bolt assemblies, rivets, welds, inside/outside corners, <br />corrosion pitted steel, built-up structural members and other irregularly shaped surfaces. <br />c) Apply as required with the following section “Required paint Layers” <br />Required Paint Layers: <br />a) Penetrating Sealer: Apply 0.5–1.0 mil in dry film thickness ( DFT) of penetrating sealer to all surfaces to <br />be painted. Any additional steps per manufacture prior penetrating sealer is used shall be done. <br />b) Prime Coat: Apply 4.0–8.0 mils DFT of primer to areas that have received tool cleaning and to other <br />areas where there is no existing primer or metal is exposed. <br />c) Appearance Coat ( Color) : Apply 2.0–6.0 mils DFT of color coat <br /> <br />  <br />   <br />DocuSign Envelope ID: 23227C11-F678-4CF3-95AF-AD4B0DEB1E28