Silman Industries NPSA 20231212 - Laserfiche WebLink

Home

Non-Professional Services Agreement between City of San Leandro and Silman Industries—Exhibit A Page 28 of 30 Traffic Control Plans day Performance of unauthorized work $250.00 per each incident Performance of work outside of approved working hours without written approval $500.00 per hour Failure to provide adequate Project Site Maintenance 24/7 $500.00 per each calendar day Storage of equipment and/or materials in public streets $500.00 per each calendar day/incident Failure to immediately remove false bottoms from manholes and storm inlets $250.00 per each incident Each location, incident, non-compliance situation, and/or violation shall be considered separate occurrences and the resulting payments for damages are cumulative (even if occurred on same day). Best Management Practices (BMPs) General: 1) All construction materials shall be stored at least ten feet away from inlets, catch basins, and curb returns. 2) Store materials that have the potential to be transported to the storm drain system, by storm runoff or by a spill, under cover in a contained area or in sealed waterproof containers. 3) During wet weather or when rain is in forecast, store materials that can contaminate rainwater or be transported by storm water or other runoff to the storm drain system inside a building or cover them with a tarp or other waterproof material secured with weights to prevent contact with rain 4) Use tarps on the ground to collect fallen debris or splatters that could contribute to storm water pollution. 5) Secure opened bags of cement and of other light or powdered materials that can be transported by wind. 6) Pick up litter, construction debris, and other wastes daily from outside areas including the sidewalk area, gutter, street pavement, and storm drains impacted by the project; all wastes shall be stored in covered containers or disposed of or recycled immediately. 7) Install Stabilized Construction Entrance in accordance with Standard Plan 606, as required to prevent material deposit on roadways. 8) Inspect vehicles and equipment arriving on-site for leaking fluids, and promptly repair leaking vehicles and equipment; use drip pans to catch leaks until repairs are made. 9) Avoid spills by handling materials carefully 10) Train employees regularly on good housekeeping practices and BMPs. Assign responsibility to specific employees on BMPs, good housekeeping practices, and what to do in the event of a spill. Refer to 7-8.6.6.8. 11) Maintain and replace all sediment and water pollution control devices as necessary to ensure that said controls are working effectively (e.g., inspect all sediment ponds or sandbag sedimentation/filtering systems after each rain, and remove accumulated sediment and debris, and replace or repair damaged sandbags immediately). DocuSign Envelope ID: 23227C11-F678-4CF3-95AF-AD4B0DEB1E28