Agmt 2005 Harris & Associates - Laserfiche WebLink

Home

EXHIBIT AS DRAFTING/DESIGN REQi1IREMENTS Plans and Maps shall be prepared on 24"x36" sheets and shall be formatted as required to obtain a Caltrans encroachment permit. If metric units are used then English equivalents shall be shown (dual unit method). All work shall be in accordance with City of San Leandro Standard Plans and Caltrans Standard Plans. Applicable details from either plan book shall be included on the drawing sheets. All plans and maps shall be prepared with Autodesk Autocad version 2004 or newer. Consultant shall deliver .dwg files for all drawing sheets. Work shall be dimensioned sufficiently to be constructed, both horizontal and vertical locations shall be shown. Plans shall include, but not be limited to, layout sheets, improvement plans, striping plans, traffic control plans, sections, details, and notes. Lineweights shall be such that the work is easily interpreted. Where new work is shown, existing features shall be screened back so that the new work is prominent. Existing features shall be noted or otherwise indicated as such so that there is no ambiguity between new work and existing features. Text shall be 3/32" tall minimum. Text shall not be overwritten by lines or other text. Text refemng to a drafted item shall have a leader with an arrow. The arrow shall actually touch the referenced item. Text shall only be oriented horizontal, so that it reads `upward', or in the quadrant between the two. No text shall be more than 135 degrees rotated from any other text. All abbreviations shall be defined in a legend. Details, plans, elevations, etc. shall be arranged and numbered on the sheets in a regular consistent pattern. Specifications shall be written and printed with times new roman font at 11 point. Specifications shall be edited such that only materials, procedures, and execution specific to this project are included. Front end specifications shall be based upon Part one of the Greenbook and City of San Leandro standard modifications. Technical specifications shall be based on section 10 through 95 of Caltrans standard specifications, with project specific modifications prepared by the Consultant. The City shall provide their front end standard modifications to the Consultant. Consultant shall review and complete the front end modifications so that they complement the technical specifications to completely describe the project. No work shown on the plans or included in the specs shall be `design build' unless it is specifically listed herein, or approved in writing by a representative of the city. Consulting Services Agreement between May 13, 2005 City of San Leandro and Hams & Associates Page 18 of 20